tell me the best impeller to "freestyle" 750sx

[danjs750]

Hi there,

Im new on x-h2o, so i don't know if my thread is at the good emplacement,

I have make few research but i don't find many info...

im looking to buy a new impeller for my kawasaki jet ski 750 sx 1993. My engine is bored 800cc and i have little porting, complete coffman pipe, big dual cooling. My pump is kawi 140 mm stock. I want to find the best impeller for "get out of the water". I want the best impeller for "freestyle fun". I hate top speed, i don't be angry if i loose all the top speed, i want the better acceleration to pop out of the water ONLY.

Impros hooker tell me about the 10/16 and skat trak tell me about 9/17 3mm back cut and pressure nozzle bored at 83mm.

What to choose?? All comment, experience feedback or tips are welcome, im really confuse it's my first jet ski. Thank for all answer. (I know that ski's are not designated for freestyle use don't tell me toy buy a SJ or a rickter i don't have $$$ for that)

 

[VXSXH20]

I had a bpipe; milled head and Sudco carb on my 95 750sx back when. Ocean pro reduction nozzle and ride plate. It was night and day difference when i had the the heavy stock flywheel lightened up and i chose a C75 hub 9/17 from skat. The larger hub with the swirl blade really turned well and had much more pop and hit down low. That is the prop to have. IMHO I had a few including the 8/16 from Impros and honestly it wasn't much better than the stock 15.5 pitch I had. 9/17 if I had to do it again.


Sent from my iPhone using Tapatalk

 

[danjs750]

I had a bpipe; milled head and Sudco carb on my 95 750sx back when. Ocean pro reduction nozzle and ride plate. It was night and day difference when i had the the heavy stock flywheel lightened up and i chose a C75 hub 9/17 from skat. The larger hub with the swirl blade really turned well and had much more pop and hit down low. That is the prop to have. IMHO I had a few including the 8/16 from Impros and honestly it wasn't much better than the stock 15.5 pitch I had. 9/17 if I had to do it again.


Sent from my iPhone using Tapatalk

Tanks, very apreciate answer. But do you talk about Skat-Trak Kawasaki C-75 Magnum Swirl Impeller, or Skat-Trak Kawasaki C-75 Long Nose Swirl Impeller, wich one will be better?

 

[danjs750]

And a third choice.... I talked to a guy at skat trak, and he told me to put Skaw-Trak Kawasaki 140/75 Swirl Impeller 9/17 with the nozzle at 83mm... wich one could be the better of the 3

 

[VXSXH20]

Glen at skat trak knows what he's doing and offering as to advice. The 9/17 c75 mag swirl is the prop to have. Depending on your nozzle already you may be happy with where it's at. I went aftermarket and felt it was too big so I used a stubby pump cone. But you should start with the prop and then try the nozzle at what skat said. Maybe even pick up a spare reduction and steering nozzle as they are cheap off eBay or wherever and try which ever one you like better.


Sent from my iPhone using Tapatalk

 

[danjs750]

Very big tanx, so much apreciate.

 

[DAG]

Asking the best prop to freestyle a kawi is like asking how many miles are on the color fluffy