Super Jet The "Just Buy a Superjet" Build

[chriselmore_1]

Use a grinder! A dremel will taker forever!

 

[garretonufer]

Use a grinder! A dremel will taker forever!

x2 grinder first. maybe use dremel for minor touch ups / smoothing.

 

[Byeai]

all the little pieces are not that hard to find just look to have money at all times cause when you don't you'll find everything you need took me six months to do a bare hull build would have been faster but i bought a Jetmaniac motor

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[fastgtfairlane]

that hull looks really familiar! if i were you since you dont have parts might as well just reinforce the engine compartment with the biaxial i gave you... 1 layer of biaxial and 1 layer of cloth and you should be set.. you can get good results from a 550 IF you know what parts to use and fine tweaking.. just swapping in a bigger engine will not cut it.. and gotta have will power... im ready to start my square build too!

 

[N2 H2O]

I will get a grinder and a 4" cutoff wheel. I just bought a -4 xmetal rn pole, pad, and bracket and a cold fusion turn plate and 50mm rrp riser bars. I'm going to get the reinforcing done this weekend and go pick up the vxr pro tomorrow.


Sent from my iPad using Tapatalk HD

 

[N2 H2O]

I picked up the vxr this weekend. It's not exactly the prettiest thing I've ever seen, but It'll work for what I need it for. The motor has 150 psi in the rear and 130 in the front. It's been sitting a while, so I'm going to take the top end off and at least put some new rings on it and make sure everything looks good. The Ebox is missing the coil, so I will have to buy one. The steering cable might actually work, though. I need to measure it, but there's a chance it will work. The pump is a little corroded, but I think I can clean it up. I need a sj steering nozzle, though. I only paid 300 bucks for the ski, so I think I came out pretty good, but I have a lot of work to do. Hopefully I'll be a little more motivated to get going on this now that I have the motor.

 

[sixfifty]

Good find! I need one

 

[iangdesign]

I went the same route and am finishing my SN this weekend. I can't wait to ride it! Good find on the WR3.

 

[N2 H2O]

I just picked up the pole setup. The pole needs to be powder coated, but I might just scrape the paint off and skip the powder coating. It looks pretty good on the ski. The xmetal bracket is a good height and should work well.

Sent from my iPhone using Tapatalk

 

[N2 H2O]

I just ordered the last batch of parts to get it all together! I just got back in town and have nothing to do this week so I can hopefully get some work done!


Sent from my iPhone using Tapatalk

 

[N2 H2O]

Finally making a little progress...

Sent from my iPhone using Tapatalk

 

[MCrider]

nice, keep it up man square love

 

[SkiDiggity]

that's a wave runner 3 not a vxr pro and those ski's generally had 650 motors for that year. make sure the motor says 61x not 6m6 on it. just a heads up. Do you need any more parts i may have some laying around. i know i have a waterbox with a little hole in the top, just needs glass pay for shipping it's all yours!! haha

 

[N2 H2O]

that's a wave runner 3 not a vxr pro and those ski's generally had 650 motors for that year. make sure the motor says 61x not 6m6 on it. just a heads up. Do you need any more parts i may have some laying around. i know i have a waterbox with a little hole in the top, just needs glass pay for shipping it's all yours!! haha

Yeah I was told it was a vxr, but I saw it was a wr3 when I picked it up. It has a 61x in it. I getting ready to order the rest of the parts I need from jetmaniac


Sent from my iPhone using Tapatalk

 

[N2 H2O]

I just bought a protec reduction nozzle and ocean pro steering nozzle. Anyone have any experience with these? I know the op nozzles are great on 550s


Sent from my iPhone using Tapatalk

 

[Owen18]

Ocean pro nozzle is great man, love it on my ski

 

[N2 H2O]

Sent from my iPhone using Tapatalk

 

[N2 H2O]

I'm going to lowes tomorrow to pick up a grinder so I can get the fiberglassing done. I'm out of town next week, but when I get back I'll have all the parts I need to put this thing together so I need to get moving so I can ride! I'm thinking tomorrow is going to be a late night...

 

[fastgtfairlane]

sweet! lemme know if you need a hand!

 

[N2 H2O]

Here we go!

Sent from my iPhone using Tapatalk