Super Jet The SAVE THE TATAS build. -2 cut, reinforce, not sure what else yet

[bobob729]

I used grease remover to remove the glue took awhile but came off better than sandiing

 

[bobob729]

well last night i got another 4 hours in after sanding and fiberglassing. II drilled my holes for the scupper and the exhaust. then i sanded and fiberglased both sides to the back. Pics below. My next step is to cut the pipes off the back and do one layer of carbon after i smooth everything out on the back. Then comes putting the pipes in and sealing everything with 5200.

 

[bobob729]

layed a little carbon today.. I like the look

 

[bobob729]

finally got the rest of my carbon layed and waited for the sealant to dry. I went ahead and cut 1/2 in to 1in. (did this by eye) off both sides to widen the tray and started foaming. heres where im at at the moment.

 

[txsuperjetfreak96]

that looks like the real fun part, im dam sure not looking forward to glassing the hull under the tray area

 

[bobob729]

i actually had to redo it again. cuz i started to cut footholds and didnt go well. so i decided to red it and it worked alot better after i figured it out. and which tray area are u talking about ?

 

[bobob729]

Heres some more

 

[rowand44]

This looks like its coming along great.

 

[txsuperjetfreak96]

guess under the tray where u stand

 

[bobob729]

I havent figured that one out yet. Also for my first time ever doing any of this I have no complaints. I think I have came pretty far for it.

 

[txsuperjetfreak96]

im gonna put foam in mine up to the tray level and then glass my tray all the way to the very inside of the sides, think itll help make it lil more stout.

 

[txsuperjetfreak96]

have u decided what your gonna do for your hood liner, u gonna keep the hood stock or cut it down

 

[Superjetjim]

You need to read this thread - plenty of helpful info:

http://www.pwcforums.co.uk/the-build_topic45908.pwc

HTH

Jim

 

[bobob729]

As for the hood liner I like the stock look so ill keep it that way for now I have a second to start stuff with though if I decided differently.

 

[bobob729]

You need to read this thread - plenty of helpful info:

http://www.pwcforums.co.uk/the-build_topic45908.pwc

HTH

Jim

Thanks I will take a look at it

 

[bobob729]

Progress

 

[bobob729]

:eek5:uch:

 

[bobob729]

Some more progress

 

[txsuperjetfreak96]

howd u go about measureing the hull for your chop. looks like u got the same angle as stock from inside of pump area to outside

 

['kotajoe]

Sweet build sir, keep up the good progress