throttle bracket on ATP manifold. need help.

[Kennay]

And by looking again... is the difference between where the cable mounts and to the drum the problem, or will your cable actually not reach the mounting area?

A SN cable should be the same as an FX1 cable length wise (Same cable). If it is a cable length issue, I assume you won't be able to run the carb with the diaphragm out because the bracket you have will hit the manifold? What exactly doesn't fit?

Damn I have a lot of posts in here :sheaky:

 

[tightithrash]

no the cable reachs the throttle plate fine.

 

[oxnard111]

so there was never a problem. the cable would have worked even with the bracket zac posted in the first post of this thread. the throttle cable we were testing it with was wound up and zip tied so that it could be stored/shipped and wasn't letting all of the inner cable out.

i removed the zip tie and now it works. problem solved everybody.

 

[Mike W]

I used a 61X bracket and a SN cable. Worked out perfect. I did have to adjust the throttle out at the finger throttle in order to give the cable at the carb a little more length. But it will work.

 

[dbrutherford]

Glad you guys got it to work.

 

[tightithrash]

me too :headbang:

 

[Kennay]

Sweet.

 

[QJS]

Glad its all sorted, it does mention the bracket on our on-line shop but perhaps its not as clear as it should be. Hope it works well for you.
Chris.

 

[tightithrash]

it should! You guys make a great product! ATP all day!

 

[infamy]

now quit posting and get that thing back together for pismo:brap: