Throttle Lever - Adjustments

Location
Tampa, FL
Soooo... I swapped out my throttle lever for the new 1 finger thrust innovations one. (AWESOME by the way! super comfortable on extended rides)... I do however have a small hiccup. I have the lever adjusted as much as I can to get rid of any play. However there is still a good amount around 5 quarters worth before the throttle really moves.

Where's the next place to look to get this fixed.
 

Tyler Zane

Open Your Eyes
Also if this is the case, you may not be opening the butterflys all the way. I take the flame arrestors off so I can watch the butterflys to ensure they are closing all the way (resting against the throttle stop) and opening all the way.
 

JetManiac

Stoked
Site Supporter
Vendor Account
Location
orlando
Soooo... I swapped out my throttle lever for the new 1 finger thrust innovations one. (AWESOME by the way! super comfortable on extended rides)... I do however have a small hiccup. I have the lever adjusted as much as I can to get rid of any play. However there is still a good amount around 5 quarters worth before the throttle really moves.

Where's the next place to look to get this fixed.
You can also adjust the throttle cable where it connects at the carb.

Exactly, remove throttle drum and install a throttle wheel on your carb if needed to help with adjustment.
 
Location
Tampa, FL
Thanks everyone, was able to get it going down at the throttle. I don't know if the cable is to long or what. I had to adjust both the lever and the throttle drum almost to the max. Looks good now.
 

yamabro

GP Performance / Patterson Powersports
Location
Dickson, Tn.
Your best bet is to do like JetManiac said and install a throttle wheel. They have several holes all the way around the wheel to set your throttle adjustment.
That way you won't have your adjustments set all the way to the max.
 
Top Bottom