Surfriding Tigercraft sv1 build

Nsmith212

Nsmith212

Location
Concord ca
Today was the day I've been waiting for, my sv1 hull finally arrived! I figured since I didn't do a write up on my last build I should do one this time. First off I wanna give a huge thanks to Chris and Tony for making this build possible and for their support for 2017, along with Tim at TNT and Brian at thrust.
Here's some teasers before we get down to building
ba3c74d3d24d241c869edc8434601904.jpg
bb1a8c3c43a512d2a420c1af4006393b.jpg



Sent from my iPhone using Tapatalk
 
Nsmith212

Nsmith212

Location
Concord ca
I'm not home to look, Does anyone know what hood seal and steering cable to use for an sv1? Hoping round nose stuff since I have that already haha


Sent from my iPhone using Tapatalk
 
Jet_jase

Jet_jase

Location
England
Nsmith212 said:
I'm not home to look, Does anyone know what hood seal and steering cable to use for an sv1? Hoping round nose stuff since I have that already haha


Sent from my iPhone using Tapatalk
Click to expand...
Did you not get a hood seal with it? Mine came with one separate to fit myself. As far as steering cable, i'm sure a regular 98-07 SJ will fit.....I've not heard otherwise.
 
Nsmith212

Nsmith212

Location
Concord ca
0597404b563eda01a6783934382bb58d.jpg
some of my parts have started rolling in, want to thank jet maniac for the fast help. Chris rauen has been working hard getting me all the big pieces which should be coming in early next week. My limited slip tank is out of powder, just waiting on a blue cap for it.


Sent from my iPhone using Tapatalk
 
Nsmith212

Nsmith212

Location
Concord ca
8e45305cd7ed5d742ae375c63e530300.jpg
electronics are pretty new, going to get cleaned up and tap the box for mounting. Msd, light flywheel, oem starter and bendix, and adding a jm coil because I do not trust the msd coils. I will probably do blue wire loom over the battery cables to match the coil, and water/fuel lines.


Sent from my iPhone using Tapatalk
 
Jet_jase

Jet_jase

Location
England
Put a good layer of super glue or clear nail varnish along lower part of the bottom graphics, mine peeled off on sunday. I used clear nail varnish but probably not enough im guessing.
 
Lm12

Lm12

Location
Richmond, Virginia
Jet_jase said:
Put a good layer of super glue or clear nail varnish along lower part of the bottom graphics, mine peeled off on sunday. I used clear nail varnish but probably not enough im guessing.
Click to expand...
There is a product out by 3m called edge sealer that is made for just that. It honestly has the same consistency and smell as pvc pipe glue from the hardware store. Use a small art paint brush and run along the edge.
 
Jet_jase

Jet_jase

Location
England
Lm12 said:
There is a product out by 3m called edge sealer that is made for just that. It honestly has the same consistency and smell as pvc pipe glue from the hardware store. Use a small art paint brush and run along the edge.
Click to expand...
Wish i'd known that before i tore my graphics up riding the other day. Chris is sorting me some new ones so i'll get some, for now mine looks pretty good just bare jel coat.
 
You must log in or register to reply here.
Top Bottom