- Location
- Syracuse Ny
TomSki Front Foothold - And Split Design - RRP Front Foothold
- Thread starter tomski
- Start date
- Location
- Annapolis, MD
Nice upgrade option with the turf pre-installed! I'll post pics of my ski with foot bar installed soon as I get a chance!
- Location
- Longview, wa
Will this work on my EME Aerial 8? I’ve been hunting for something like this for my front foot
- Location
- Bay Area, CA
post dimensions of the front of your tray and I can help you out with measurements later if Tomski hasn't chimed in... they are solid on the sides so even if your tray is wider its not a big deal. I am running mine with gaps on the side but filling the gaps with underpadding before turfing so it will appear to run the whole width of the tray
- Location
- Longview, wa
My tray is 15 1/2” wide Thankyou for the help
- Location
- Bay Area, CA
It sounds like it will fit just fine, but the foot hold won't reach wall to wall if that makes sense, so you will either have a gap on each side or you can fill the gap with foam/padding and then turf over it to make it wall to wall .. I'm getting 12-3/4" for the width of the hold itself and then I have actually trimmed the flange around the hold so I can't give you the original measurement there... but it was definitely less than 15" to start with... it should fit your tray without modifications. Depending on what's on your bulkhead/firewall you can either through bolt it (what I'm doing) or it can be epoxied/glassed to your hull... I'd say go for it, they are made really well.
- Location
- Longview, wa
Does he have a website I can order it off of? Or should I just send him a PM?
Thankyou again for your help I appreciate it
- Location
- Bay Area, CA
Damn lol
- Location
- Slc
I need one for a 94 square nose single piece design. New to the sight won’t let me follow the link or pm.
- Location
- Bay Area, CA
You need to post 5 times and then wait an hour or so for the hourly "task" of updating user permissions to run automatically....
Go here and spam away:
Cant send private messages - read the first post
EDIT BY ADMIN: You need 5 posts ***PLUS*** the hourly task has to run that promotes you to the usergroup that can PM. 5 posts, then you have to wait until the task promotes your account. I am trying to buy some parts for my superjet and was trying to contact a member via pm but dont seem to...
www.x-h2o.com
- Location
- Bay Area, CA
@DragonWagons here is the Tomski FFH on my '93 square.. minor trimming of the flange and some foam added to the sides because my tray is wider than stock...I bolted mine on..
Very nice product.
Very nice product.- Location
- Slc
That looks geart thanks for the pictures, and giving me a post to reply to.
Sent you a PM. if you're still making or have any, I'll take one for my SN.
Whateverguy
Bill Buttlicker
- Location
- Vancouver, Canada
I Also sent a pm with no response...who else Is making these??