top end rebuild question

[akevin]

i just got my cylinders ported and bored,milled head ,got the gasket kit and matched wiseco pistons for a 96 superjet, im new to the site and motor rebuilds, is there any threads out there that give a step by step instructions on putting everything back together properly, i couldnt find one, ive done it on many dirt bikes and just wanted some proper procedures, u know torques,gasket sealers etc?

also ive got stock carbs w msd ignition and a b pipe ,will i need any carb modifications or rejetting for this thing to run like champ

 

[carbonjet]

i just got my cylinders ported and bored,milled head ,got the gasket kit and matched wiseco pistons for a 96 superjet, im new to the site and motor rebuilds, is there any threads out there that give a step by step instructions on putting everything back together properly, i couldnt find one, ive done it on many dirt bikes and just wanted some proper procedures, u know torques,gasket sealers etc?

also ive got stock carbs w msd ignition and a b pipe ,will i need any carb modifications or rejetting for this thing to run like champ

I haven't seen that thread.. I would call one of the shops and ask for their tech, also you may be able to buy a shop manual for your ski. When in doubt though take it in..

 

[#ZERO]

Here are some free manuals thanks to Shonuff.

http://www.drmikesandy.com/X-H20/X-H20.htm

 

[rossthaboss11]

this should help http://www.sbtontheweb.com/pdfs/y650701x.pdf

 

[QuickMick]

I haven't seen that thread.. I would call one of the shops and ask for their tech, also you may be able to buy a shop manual for your ski. When in doubt though take it in..[/QUOTE]

take it in where?? the DEALER?