TPE964, factory pipe, pump etc

x2mafia

Maximum effort
Location
WA
Chasing new dreams. This stuff isn’t saucy enough. Prices are plus fees and shipping depending on the size. If it fits it ships and I’ll cover it. Hull is for sale as well. Feel free to Ask about any little bits and pieces

TPE bought straight from the man himself. Comp crankshafts rebuilt oem crank, pump gas, ridden easy. Broke in with Dino oil and ran Dominator mixed at 32:1. Always fogged after riding with 50/50 oil and gas. No aerosol stuff. 3900 with thrust cover.

Php manifold, 46s, arestors, adapters, throttle wheel, thrust coupler and vf2s 800


Factory pipe mod chamber with twisters, all screws turn, JM headpipe bolts, bored head pipe and ported manifold. 750

RRP waterbox 170

Solas 148 with wsm shaft and oem bearings, low run time on the shaft. Thrust pro trim with newer cable. Comes with lever. 11/17 d75 skat cutback from impros a few months back. 1750

Rad dudes tank with a fiberglass cradle, powder black. 250


Thrust pole with steering stop, chinpad, thrust steering, riser bars, vans grips 1100

61x electronics with heavy 650 flywheel, new OEM solenoid, new yamasaki coil, new MSD enhancer Jm stator, JM regulator. all replaced with the motor install beginning of the season. - 700




37407B17-4647-47DD-9DDA-E37BBFA06C03.jpeg27CF8D68-3227-4C20-A428-F41F9D0A4445.jpeg1DFE5B1B-DE38-48BF-8F25-094254517FA9.jpeg63FDC861-95A6-46F1-AA27-055300394241.jpeg
 
Last edited:

x2mafia

Maximum effort
Location
WA
Tank is almost 4 gallons.
13 inches tall in the middle
10.5 long in the longest point
9 inches wide. Battery tray holds quite a few sizes but etx 9 and 12 fit best
 
Top Bottom