Ski triple 1100cc swapped Kawasaki 650sx

[Bjdimsey]

Selling my custom triple 1100cc swapped Kawasaki 650sx!



It has a lot done to it,

the hull was shortened 6 inches, the hood was shaved along with part of the hall to match the hood.

Tray was widened with custom fiberglass foot holds,

The front of the ski was rounded, reinforced and the pole mount was moved forward.

It has a custom made pole and a pressure tested aluminum gas tank



The 1100cc triple was freshly rebuilt only five hours on it. It has new crank, pistons And rings, and the cylinders were

re -sleeved

also has a cold fusion cylinder head,

custom pipe, and electric fuel pump.



It has dual 800 GPH bilge pumps, also has about 30° of trim with a RRP trim cable skat Trak 8/16 prop

Blowson freestyle Cone

WORX Intake Grate



The ski runs great, its maneuverable

Super stable, and has A crazy amount of power!



The ski has lots of money put into it and hundreds of hours building it, sad to let it go, asking $7800.

 

[Wakeking01]

Hey I was wondering where you were located??

 

[Quinc]

Awesome build! Any videos of it in action?

 

[Bjdimsey]

Hey I was wondering where you were located??

Menifee California

 

[iangdesign]

Is there a build thread for this ski?

 

[Bjdimsey]

Is there a build thread for this ski?

No I never made one

 

[Bjdimsey]

Price drop! $6500

 

[elkmud650sx]

i have a question about the pole did you use the stock steering cable thinking about doing it to mine. also do you still fill at the factory location?

 

[Bjdimsey]

i have a question about the pole did you use the stock steering cable thinking about doing it to mine. also do you still fill at the factory location?

It was a complete custom-made pole/bracket. the mounting location was moved up like 8 inches or so. I was able to use the stock steering cable.
But I was also using part of the stock steering system for it, (like the swivel part)

 

[elkmud650sx]

Okay awesome I think I am going to do it. My pole almost looks like what you have mine is -2 from stock did you use the stock length or was it shortened?

 

[Bjdimsey]

Okay awesome I think I am going to do it. My pole almost looks like what you have mine is -2 from stock did you use the stock length or was it shortened?

It was completely (custom-made) from tubes and flat sheet of aluminum.
I don’t remember the dimensions that I made it to. The only thing I use from the stock pole was the (turn plate).
I don’t know if you saw in the pictures,
but I reinforced that lower section that I mounted the pole too. I would recommend doing that. It’s too thin down there to mount a pole stock.

 

[Asherlikesjetskis]

Is this still available? And why are you selling?

 

[Bjdimsey]

Is this still available? And why are you selling?

No I sold it a year ago, I got a freestyle ski instead.

 

[elkmud650sx]

It was completely (custom-made) from tubes and flat sheet of aluminum.
I don’t remember the dimensions that I made it to. The only thing I use from the stock pole was the (turn plate).
I don’t know if you saw in the pictures,
but I reinforced that lower section that I mounted the pole too. I would recommend doing that. It’s too thin down there to mount a pole stock.

yes i seen in the pictures, looks like a winter project

 

[Bret118]

What did you do for hull venting after you chopped the hood down if you don’t mind me asking

 

[WFO Speedracer]

That hood and nose shape looks really similar to my fixies hood and nose.

Now you got me thinking and that's a bad ,bad thing.

 

[Bjdimsey]

What did you do for hull venting after you chopped the hood down if you don’t mind me asking

There was still two vents on either side. They just have frogzskin over them to keep water out

 

[MpoulosFire619]

looks like I got this ski through a buddy who owned it. Was sunk and recovered somewhere in AZ last year. Just brought it back to life with a low hour 900 swap. I have a ton of questions about this build! It has been so hard to put this puzzle back together! So glad I found this post

 

[MpoulosFire619]

There was still two vents on either side. They just have frogzskin over them to keep water out

So many questions!

 

[Bjdimsey]

So many questions!

No way! I’ve been wondering where it went! I will message you with my number. Give me a call anytime!