Freestyle Trying to figure out which prop

[fast superjet chase]

I have a rickter xfs with a 785 lamey/dasa 8mm power valve motor with all the goodies, and am running a solas 144mm mag pump. My question is what prop should I be running in it for flat water? I am having a hard time trying to figure out what pitch to be running. Thanks in advance

 

[Pablo]

Mine was a 862cc 8 mil lamey, but I used both a 10/16 or a 11/17 144 skat mag props. 85.5 mm nozzle and stubby cone. I would think u could use a 10/16 hooker on a 85mm nozzle.




Sent from yo' momma's house...on her iphone

 

[fast superjet chase]

So far I've tried a 8/14 skat mag prop and a 11/17 hooker the hooker is too steep for it and the 8/14 spins pretty hard.

 

[fast superjet chase]

My nozzle is at 85mm

 

[Tyrant1919]

What pipe and ignition are you using? Also, you've done everything you can and you know what you have to do. Get a 10/16 or a 9/15.

 

[fast superjet chase]

Running a pfp, msd total loss, 48mm full specs, vforce 2 reeds, dasa manifold, 144mm solas mag pump, dasa/lamey 8mm stroker with PV

 

[Tyrant1919]

10/16 it. I had an 850ss with pfp and no TL on a 13/17 spinning just a tad fast. I had a 10/16 with my bpipe on the 144.

 

[fast superjet chase]

What elevation are you riding at?

 

[Tyrant1919]

Sea level