Freestyle Tunning PFP

[kieran79]

What's the best way to dry out the pfp

 

[Matt_E]

It's a dry pipe. :clown:

If you're talking about the waterbox, the pipe ships with a pro series Jetworks flow control valve installed for just that purpose. Just watch your waterbox temperatures.

 

[kieran79]

Ok,my water box is pretty warm but my pipe feels cold to touch I ran my hoses as they have them on the website

 

[onlyFX-1]

To get the chamber hotter run a hose clamp on the line at the end of the chamber that goes overboard and tighten down on it till it gets warm. Set it up so it's cooler than the waterbox but still warm

 

[Lucaumpits]

i would run on the traileroke:

 

[kieran79]

I did read on another thread people running different water set ups on pfp with good results ?

didnt realise it was a stupied question

 

[onlyFX-1]

It's not a stupid question. You do want the chamber to have some heat to it. By putting a hose clamp around the hose going overboard and tightening it down, water will stay in the water jacket longer making the chamber get hotter