SXR Water in carbs

if you pump the primer and it starts right back up, its fuel related and starving for fuel.
it bogs out probably because its running out of gas.
the condensation on the plates is probably there because no gas is going across them.
check all fuel lines and filters. I have seen carbs that wouldn't work no matter what but probably not 2 at the same time.
 
run it on the trailer again with filter removed and see.
the water has to come from somewhere,if not condensation from vacuum drop in carb,then through the carbs fuel system or through air filter. with engine running you should not see the build up of condensation on throttle blades,most of it should get washed away with fuel spraying very visibly out of the venturi
magneto is dry inside?
if ski fires right up with primer shot after stopping,you can probably rule out electric failure
 
Last edited:
Top Bottom