Other Waterbox

[Lival]

Anyone know a link to show the inside of one? I have been looking all over the net.

 

[Waternut]

What kind? There are tons of different designs on the inside. I may have a SN box that I blew up that shows the baffles. The TDR goes in the side, down the bottom and around the sides and out the top. The SN Factory Pipe waterbox is completely open with a small piece of metal blocking a direct flow from the inlet on the side to the outlet on top.

 

[Tyler Zane]

i have always wondered the same but its a simple concept of baffles from what i understand. im sure companies have tried to over think it but its relativity simple.

 

[kevbo]

NASA engineers must have designed the old Polaris waterbox.

 

[Lival]

I would like to see any of them on the inside. I am sure they have been over thought like everything else out there. Just can't seem to find a picture of one. I guess I will have to find one and cut it open to see what's in there.

 

[swapmeet]

I just stuck a FX1 waterbox in the trash. Backfire blew most of the side out. I thought about cutting it open but its a messy ordeal with fiberglass everywhere. I didn't care enough to look, but I thought about it.
I didn't put it on the curb though so if anyone is dying to know I guess I can dig it out.

 

[eeerieski]

Since nobody seems to have a pic of one....... here ya go: Note they make great mousetraps and this is out of a blaster, exhaust come in through the bottom tube on the right and exits through the blown off lid on the right. The exit tube stretched down to nearly the bottom of the box to suck water too.

 

[Lival]

So to summarize and correct me if I am wrong..... The exhaust enters the top of one side of the chamber into a void. The chambers are connected via a vent tube. The exhaust exit has a down pipe that is close to the bottom of the void to also act as a siphon to pull water out of the box. Is that fairly accurate? I drew a rather dumpy drawing to illustrate what I am asking.

 

[eeerieski]

according to the blaster waterbox you are very close, to duplicate it: the in pipe travels through chamber b dumping in chamber a and the out pipe exits through the top of chamber b

 

[swapmeet]

Very cool, I've been wondering about this for some time, been wanting to build my own for fun.

 

[Lival]

Same. I am doing some fabrication right now for other parts and was curious about this one as well.

 

[Kawastyler]

Somebody know how to upload pics from iphone to forum???? Have modified rn waterbox and rewelded. Pics on my phone.......


Andy

 

[Mark44]

d

Somebody know how to upload pics from iphone to forum???? Have modified rn waterbox and rewelded. Pics on my phone.......


Andy

What is there to modify on a stock water box?

 

[Tyler Zane]

What is there to modify on a stock water box?

you can make it louder, it sounds sweet lol

 

[JetManiac]

I have raider waterboxes which can be cutdown and rewelded into rn size...

 

[Polish jet pilot]

ATP ones are nice too! If someone needs one let me know - nice deep but louder sound, and more power throughout the powerband!!

 

[Kawastyler]

What is there to modify on a stock water box?

Removing the tubes in the wall and cut 1cm off bottom of in and outtube.
Is light louder then stock but a musthave for big engines. But you dont feel thedifferent with stock engine


Andy

 

[Lival]

Kawstyler get those pics up. Many of us are interested in the internals here.

 

[Kawastyler]

Kawstyler get those pics up. Many of us are interested in the internals here.

Ok, but must upload to laptop on monday. Dont have an idea to upload it from iphone........ Or you give me mailaddress and i send you pics. You can upload it????

 

[Lival]

paul@infrafuse.com would like to see the pictures.. the more the better. thanks.