New Wcf OVP steering system back in stock!! $200 shipped!

[waterfreak]

We now have some ovp steering systems in stock . They all use fat bars . $200 + shipping

 

[Big Kahuna]

What is the bushing system?

 

[SteveC]

I see a grease zerk on the side... can we see one opened up?

 

[waterfreak]

What is the bushing system?

uses thrust bearings

 

[CD155MX]

uses thrust bearings

Roller or Ball?

 

[Ducky]

Guessing roller since that is what is run in the RRP system

 

[waterfreak]

ttt

 

[waterfreak]

in stock RTS

 

[swflsuperjet]

in stock RTS

I’ll take one ASAP. Lmk how to buy

 

[Big Kahuna]

Sent him Steve a PM.

 

[waterfreak]

New shipment just arrived!
RTS

 

[waterfreak]

Ttt

 

[Skiab720]

does the bottom have the 4 small bolts to attach the the pole? or how does it attach to the pole I'm looking to replace the krash industries one.

 

[waterfreak]

does the bottom have the 4 small bolts to attach the the pole? or how does it attach to the pole I'm looking to replace the krash industries one.

yes, it attaches with 6m bolts with lock nuts underneath

 

[Skiab720]

yes, it attaches with 6m bolts with lock nuts underneath

Ill take one

 

[waterfreak]

currently out of stock. should be back in in about 2 months

 

[Skiab720]

For anyone wondering about this steering i got it and it’s not as good as the thrust ones. I figured I’d try it because thrust was out of stock but now I regret not waiting. Would not buy again it comes loose just like the super poopy krash one that I replaced.

 

[jeepcreepcj]

For anyone wondering about this steering i got it and it’s not as good as the thrust ones. I figured I’d try it because thrust was out of stock but now I regret not waiting. Would not buy again it comes loose just like the super poopy krash one that I replaced.

As far as I know, this is basically the same as rrp x-lite steering. On my rrp x lite, i was having trouble with it coming loose when new too. On the base where the center bolt threads in, there is a stainless “insert” that has left hand threads on the outside. This was coming loose causing the issue for me. After I cleaned it up, put red loctite on the left hand thread and let it cure before assembly, no more issues.

 

[waterfreak]

As far as I know, this is basically the same as rrp x-lite steering. On my rrp x lite, i was having trouble with it coming loose when new too. On the base where the center bolt threads in, there is a stainless “insert” that has left hand threads on the outside. This was coming loose causing the issue for me. After I cleaned it up, put red loctite on the left hand thread and let it cure before assembly, no more issues.

There you go! You got to set it up right the first time them your all set !

 

[waterfreak]

Steering systems back in stock