WCF Vision Owners..How many are there?
- Thread starter INDebtSJ
- Start date
- Location
- s florida
Sweet^^
What size pump are you running?
Thinking of either a lay down pipe or bigger pump for next year.
- Location
- kent island maryland
Visions are definitely the most underrated hulls out there imo everyone that rides mine absolutely loves how it handles and performs!! My vision is the old optima racing black 2.0 -4 but I just had painted with imron and added a carbon hood also I added a build in splash guard to the little step in the bow right before it goes under. Basically Its a fiberglass strip so that lip was extended out making a pocket to throw the water out to the sides vs. fwd and into your face it stops about 80% of the bow spray. These are the only pictures I have right now if any of you are interested I can take some better ones later Just let me know.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It's a 148 max... Prior to that was a 144 solas & 11/17 hooker with a 200 psi +8 mil 865cc Lamey cylindered engine on a bored b-pipe.
Then I went lay down Pipe, RRP, and was like wtf! I felt dooped and regreted how long I had waited to go with a Lay down pipe.
Well said and the ski looks killer... If you have the time for a couple pics of the splash shield would be coolVisions are definitely the most underrated hulls out there imo everyone that rides mine absolutely loves how it handles and performs!! My vision is the old optima racing black 2.0 -4 but I just had painted with imron and added a carbon hood also I added a build in splash guard to the little step in the bow right before it goes under. Basically Its a fiberglass strip so that lip was extended out making a pocket to throw the water out to the sides vs. fwd and into your face it stops about 80% of the bow spray. These are the only pictures I have right now if any of you are interested I can take some better ones later Just let me know.
Sent from my iPhone using Tapatalk
Thought about selling and getting a different hull but figured I will upgrade a few things.
Looks like the pipe will be it this year.
Looks like the pipe will be it this year.
- Location
- kent island maryland
I used the cold fusion sticker as a reference and yeah I know it's cracked on the edge apparently the water pressure while running is no joke so I'm gonna beef it up this winter.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- s florida
CD155MX
Squirrel!!!
- Location
- Alta Loma, CA
Hey Steve,
Could you give a rundown on your new Vision X please? Very curious to hear the changes from the Vision 2.0 and how it rides compared to the 2.0.
Thanks!
- Location
- s florida
Sure!
New Vision X :
- about 4 inches shorter
-hull is about 2 inch wider with re designed side rails for better stability and handling
-tray is much wider and side gunwale are much lower for that super comfortable and secure feel
-more rocker in the front
-adjustable hull/ ride plate to fit your riding style better
-redesigned pump intake duct that accept 144 and 155mm
-all hulls are now vacuum resin infused
CD155MX
Squirrel!!!
- Location
- Alta Loma, CA
-Is that 4 inches shorter than the std length Vision 2.0 or the -4 Vision 2.0?
-What is the average lead time needed to complete a hull?
- Location
- s florida
About 4 inches shorter than the -4 vision.
Lead time is 30 to 45 days
MarkWalker
Site Supporter
- Location
- Buffalo NY
Looked at the Vision X in Daytona this weekend. 1st class all the way. Clean lines, huge tray and easily the most room I have ever seen under the hood. Great work Steve.