Wet jet pipe on blaster 1?

[agua]

I have a wetjet pipe and was wondering if i can use it on a blaster if i cut the end off and turn it around, if so How is it held together i have the 2 clamps but theres no rubber couplar that goes between them, there seems to be some sort of silicone or gasket spray on it though

 

[BombThreat]

I tried mockin one in there and the manifold was too big plus the chamber looked like it was gonna hit the hull....

ive heard rumors of people makin it work but I have yet to see how!

 

[snowxr]

I've seen a B1 pipe made by Westcoast that looked very similar to the WetJet pipe (also made by Westcoast). Maybe that's what people have mistakenly referred to as a "WetJet" pipe in a blaster. At first glance it would be easy to make that mistake, since they are visually very similar.

 

[dabeetereater]

it will fit you just need to put a little notch in the hull under the choke nob, in the bend for the footwell,
and the gaskets are copper oring things that go inbetween with v band clamps,, you could just fill it up with slicone and probably be ok or search around for a fat rubber viton oring and be good to go