Blaster What are your screws set at on a FP Limited chamber?

[tightithrash]

so i got the Blaster going again and took it for a spin. sometimes is hesitates on the mid. im thinking maybe its my headpipe screw setting being off.

currently my set up is stock 760 with a factory pipe with a limited chamber.

screws are;

top= 3/4 open

middle= closed

bottom= 1/4 open

what are you guys running?

this blaster is setup for surf riding.

 

[BruceSki]

I'd go bottom 3/4 open, top and middle closed. You don't need that bottom pop on a blaster. In the surf its all mid to full throttle to do anything on a blaster.

 

[tightithrash]

sweet, ill give that a try. thanks bruce.

 

[Byeai]

I have it as top and bottom half and middle closed

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[chriselmore_1]

top and middle closed. Bottom open 1/2 turn stinger dry.

 

[crazy4sand]

Top middle closed bottom 1/2

 

[Crab]

Yea it needs to run a bit hot, makes plenty of bottom already.

 

[Screwy]

top middle closed bottom just under 3/4 turn and jet works valve with 2 washers on stinger

 

[extreemthrottle]

so i got the Blaster going again and took it for a spin. sometimes is hesitates on the mid. im thinking maybe its my headpipe screw setting being off.

currently my set up is stock 760 with a factory pipe with a limited chamber.

screws are;

top= 3/4 open

middle= closed

bottom= 1/4 open

what are you guys running?

this blaster is setup for surf riding.

honestly, mid range bog sounds like popoff to me. just my 0.2..

 

[Screwy]

agree..... mid range sound a little on the thick side. what pop off spring and N/S are you running?