What is the quietest lay down pipe waterbox?
- Thread starter Storbeck
- Start date
- Location
- Winter Park
JetManiac waterbox would be a good contender. More water would quiet things down and the JM is tapped with a bung to inject water straight to the box
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- N. Carolina
What happened to that poor thing??
My TNT box does not have a bung but I can certainly add one.
I'll probably do some playing around with adding water at various points, but I was hoping to just start off with a quiet box if such a thing exists.
For a laydown pipe you basically have three boxes that most people are running: TNT, RRP, PFP and then a few extras like Xscream and Jetmaniac and who knows what else.
I have a PFP box on hand that I can try, but was hoping there was somebody out there that was familiar with a few of them and could comment if there is anything that stands out as noticeably quieter. I know most people don't really care, but it's something that might get noticed if you have two side by side.
In my hazy memory I actually recall the pfp box being quieter (on a different motor, with a different pipe, for what that's worth), but usually bigger is quieter so I dunno. the smaller box sure is convieneint for fit purposes, so there is that.
I'll probably do some playing around with adding water at various points, but I was hoping to just start off with a quiet box if such a thing exists.
For a laydown pipe you basically have three boxes that most people are running: TNT, RRP, PFP and then a few extras like Xscream and Jetmaniac and who knows what else.
I have a PFP box on hand that I can try, but was hoping there was somebody out there that was familiar with a few of them and could comment if there is anything that stands out as noticeably quieter. I know most people don't really care, but it's something that might get noticed if you have two side by side.
In my hazy memory I actually recall the pfp box being quieter (on a different motor, with a different pipe, for what that's worth), but usually bigger is quieter so I dunno. the smaller box sure is convieneint for fit purposes, so there is that.
Seems like it would. Water in the box (rather than in the stinger) seems like it would have less effect, but I'm not sure.
My box is already fully encased in turf.
No, I was saying Keep the water at the stinger as is...
Just add water to box via an additional water line.. to squash some of the noise..
I’ll ad a bung to my LS 7 box to run with RRP pipe which runs an injected water box normally.. I want to try this scupper box combo for a surf application....
I run a down turn on my exhaust outlet out the back to redirect noise down ward at times and also run a scupper type flap over the outlet in surf
I understand what you mean, I was responding to Stefan's comment that more water would kill bottom end. It seems like water in the box would have less affect on the tuning than water at the stinger, so like you said leave the stinger water alone, then for noise add water directly in the box to (hopefully) have the most affect on noise with the least affect on tuning.
Hopefully.
I kinda suspect all of this won't do much, but worth a try.
Still makes sense to start with the quietest box if possible.
Anybody else?
- Location
- Coarsegold CA
Run a tdr box they are not too loud but sount great.
Mark had the same results
You could the bung to a Section pipe in between the box and thru Hull pipe..
The Pjx hull hade a silencer i the exhaust