- Location
- MI
I have a ported 718 single carb, b pipe, stock 144 mm pump. Possibly an mad enhancer in the future. Kind of lost on what impeller to get. Any advise helps
What prop should I get
- Thread starter Coconnor31
- Start date
- Location
- Ontario
I personally havent had to much actual experience with impellers. (Only know what others have said) But what type of riding are you doing, what impeller was on it/do you want more low end or top end compared to your other impeller?
john zigler
Vendor Account
- Location
- wisconsin
What hull? What kind of riding are you doing? (IE Chasing boats, hoping to flip, Flatwater, etc)
john zigler
Vendor Account
- Location
- wisconsin
We have been doing custom impellers for SJ's with excellent results. 10-16 hooker is also very good for a Rec ski / SJ
If you have a flatwater ONLY ski, I recommend a Hooker. 9-15.
Also need to know exit nozzle size.
If you have a flatwater ONLY ski, I recommend a Hooker. 9-15.
Also need to know exit nozzle size.
- Location
- MI
An fx1 with a 144 mm pump, choppy lake waves, sometimes big waves, sometimes flat. I Like low end power, it's rare to be able to hold it wide open where I ride.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
with that small pump tunnel, I would look at the Skat Freeride Swirl 12/17. This will work good, the Hooker 9/15 is a great impeller also, but with the big hub design it may overload the pump tunnel some.
- Location
- MI
Didn't even consider the hub size. So a swirl is the same size hub as stock?
- Location
- United States
The Hooker by impros is legit great product, especially for bottom end pull
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Hooker has the 75mm Hub, This is the large hub size. A Skat Freeride has the std hub size.
hornedogg79
dodgin' bass boats
Skat freeride swirl comes in both hub sizes. (C75) freeride swirl 12/17 would be my pick. Fx1 intake feeds a 144 just fine.
Sent from my SM-G930V using Tapatalk
Sent from my SM-G930V using Tapatalk
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Im Old, back in my day the "Freeride" did not come in a large hub!!!!!!!!!!! Damn whipper snapper.................. Trust Hornedogg, he knows the FX-1's
john zigler
Vendor Account
- Location
- wisconsin
FX-1 is a totally different animal....
As stated, the Skat would be a good choice, I think you'd be OK with a large hub. (I like them as they are more efficient. ) Or again I can do a custom one for you.
As stated, the Skat would be a good choice, I think you'd be OK with a large hub. (I like them as they are more efficient. ) Or again I can do a custom one for you.