Super Jet What turf with Toby holds?

[IWannaYama]

I will be installing toby footholds and was just wondering what turf to use. I was leaning towards the molded diamond cut sheet 40x62. Would 1 sheet be enough? I was also thinking of doing the side rails but not sure if Id have enough.

 

[Byeai]

I did my 650 with his holds but I stated side rails and didnt have enough

Sent from my SAMSUNG-SGH-I897 using Tapatalk

 

[IWannaYama]

I did my 650 with his holds but I stated side rails and didnt have enough

Sent from my SAMSUNG-SGH-I897 using Tapatalk

with 1 sheet?

 

[Byeai]

Yup one lime green cut dimond

Sent from my SAMSUNG-SGH-I897 using Tapatalk

 

[icecoled007]

If its your first time I owuld get two sheets. Nothing worse then running out and having to wait a week+ for more.

 

[IWannaYama]

Okay thanks. Where does everyone order from? Seems like HT is out of stock

 

[mxmark4]

just got a sheet of "b" stock,looked just as good as regular turf.one sheet did my tray and sides.

 

[IWannaYama]

just got a sheet of "b" stock,looked just as good as regular turf.one sheet did my tray and sides.

Yeah i was looking at that but i think it only comes in gray.
Edit: It actually looks decent with the dark gray. As far as the under padding goes, what mm should i be getting and does the hold get it to?

 

[IWannaYama]

bump! where is the padding sold? is there a cheaper water proof alternative i can buy at home depot?

 

[mxmark4]

Get your padding from hydro turf b stock comes in black or grey i got two sheets of black anfd did an x2 and my sn
the 17x37 piece of foam will do you tray and holds and then some

 

[mxmark4]

If i were to turf my holds over again(which I am considering) I would start at the top of the rail and work my way down.I started at the front of the tray and i cant get my turf to stick at the back side of the foothold.Another suggestion for the 615s would be to cut a strip of foam to put on the outside top of the foothold toatake up a bit of the gap so the turf doesnt pukk such a hard radius.

 

[IWannaYama]

Get your padding from hydro turf b stock comes in black or grey i got two sheets of black anfd did an x2 and my sn
the 17x37 piece of foam will do you tray and holds and then some

Only comes in dark gray and gray.
Went ahead and ordered 2 sheets of b stock

 

[IWannaYama]

If i were to turf my holds over again(which I am considering) I would start at the top of the rail and work my way down.I started at the front of the tray and i cant get my turf to stick at the back side of the foothold.Another suggestion for the 615s would be to cut a strip of foam to put on the outside top of the foothold toatake up a bit of the gap so the turf doesnt pukk such a hard radius.

Cool. Ill keep that in mind thanks

 

[IWannaYama]

How thick should the under padding be??
Can i opt for a gym mat from walmart or similar from home depot?

 

[icecoled007]

How thick should the under padding be??
Can i opt for a gym mat from walmart or similar from home depot?

Ive heard of people doing this. Its ok as long as it doesnt absorb water! You dont want it to soak up everything.

Just order it from HT and be done with it.... nothing to worry about.

 

[mxmark4]

The ht mat is only 15 dollars I used 9mm mat and it was nice I wouldnt go any thicker.

 

[IWannaYama]

The ht mat is only 15 dollars I used 9mm mat and it was nice I wouldnt go any thicker.

I found an old golds gym exercise mat. Im just gonna use that since I already put the order in from HT

 

[kefx1]

If i were to turf my holds over again(which I am considering) I would start at the top of the rail and work my way down.I started at the front of the tray and i cant get my turf to stick at the back side of the foothold.Another suggestion for the 615s would be to cut a strip of foam to put on the outside top of the foothold toatake up a bit of the gap so the turf doesnt pukk such a hard radius.

Thanks for the heads up. Will be doing mine in the near future
.

 

[mxmark4]

no problem wish I had known when i did mine.