Other Whats broke on your ski that you're putting off fixing?

D-Roc

I forgot!
lol, great thread. I think you guys need to address these issues only when they keep you off the water and then post in the other thread when you finally had to fix it. I have a buddy that has a major leak in his foamless hull and he has been riding it for two seasons and still doesn't fix it. just drains the water back into the lake during refuels. haha. he has had some close calls loosing it too.
 

stanton

High on jetskis.
Location
atascadero,ca
i got a motor mount being held together with silicon, its actually holding!
my midshaft housing is so clapped it vibrates and makes noise
my impeller has a couple big chunks off the leading edges
my driveshaft is about to strip
waaahhh
 
This thread makes me feel better about my ski, lol.

But the sheath on my s/s wires came out of the shrink tubing on one end, bugging the :):):):) out me.
My sizzler chamber is throughbolted on the manifold becuase the threads are completely gone.

and possibly the most annoying...

There's this little voice in the back of my mind screaming "You suck at fiberglass and you KNOW your footholds are leaking water into your foam."
 

JustinB

Proof I has a brain \l/
Location
Oxford, MS
As much turf work as I do, I have never finished the dash turf on my SN- you know, the piece where the e-box bolts come through. I cant find a 19+ pitch impeller for the 750 conversion ski, so its going to be bouncing off the rev limiter until next summer. My carbon Wammer hull has a big crack in the bottom fixed with sheetmetal and rivets.
 

NVJAY775

My home away from home.
Chipped intake grate that needs a build up weld and shaping from a river ride. (no cavitation)
Dinged up hooker impeller on the same ride. (no cavitation)
A loose non working bilge pump. The other one works like a champ though!
Hoping my motor makes it through this season with a 7 psi difference between cyls.

Other than that she rips it!

Great thread. Thanks OP!
 
Top Bottom