Where can I get an M10x1.25 stud?

[yamanube]

I need to install at least two studs in my cases to run my ProTec cyinder but cannot seem to find stainless M10x1.25 studs. Anybody know of somewhere that sells these?

 

[Freakrider]

Have u looked on McMaster-Carr ?

 

[yamanube]

Yes, they seemingly have nothing M10x1.25, my other option is to buy a long screw and cut the head off, which I am not against but that is also difficult to find. Pro-Bolt has a decent selection of screws but I have to see if any are long enough.

 

[Ducky]

Find someone with an extra ADA girdle stud, cut it down, and rethread the end?

 

[txsuperjetfreak96]

You checked with boltdepot.com


Sent from my iPhone using Tapatalk

 

[speedysprocket]

I had to get studs like that custom made for my cylinders... Power Factor wanted like $25 a stud (I needed 8), but Erik had them made out of stainless rod for a total of about $8 each!
Probable. With a long screw would be finding one threaded the entire length... Might need to buy the die to thread the end by the head...

 

[Quinc]

You can buy single studs from ada now. I had to get all thread special ordered from a local place in town and it took weeks. You can also find it on ebay, but doesn't list grade in the description...

 

[blaster800]

did you search ebay ... they have several types and sizes http://www.ebay.com/itm/M10x1-25-Ex...uts-/331494410053?hash=item4d2e9b4745&vxp=mtr

 

[yamanube]

did you search ebay ... they have several types and sizes http://www.ebay.com/itm/M10x1-25-Ex...uts-/331494410053?hash=item4d2e9b4745&vxp=mtr

I only looked very quickly and didn't see any stainless...those might just get the job done for now though, thanks.

 

[just joe]

Fastenall has them.

 

[Quinc]

Fastenall has them.

link?

 

[WB800BLASTER]

When in doubt who do you call? Kris and Jetmaniac can get them for you.

I have them in stock stainless allen cap screws m10 x 1.25 ( 45mm, 65mm, 80mm)

I also have like the old riva griddle kit bolts.
M10 x 1.25 (44mm & 58m)

.

 

[WB800BLASTER]

cut the head for a stud

 

[OCD Solutions]

Any chance these are the same as Seadoo uses? I have a ton of hardware left over from my 951's including a bunch of the exhaust studs.

 

[yamabro]

Pro-tec has them. I just ordered some

 

[OCD Solutions]

Sorry, the Seadoo stuff is M10x1.5

 

[augustaf]

how about item #175 (kawasaki)....http://partsfinder.onlinemicrofiche...sakipwc&a=155&b=5&c=0&d=1992 750 SX CRANKCASE

 

[hornedogg79]

how about item #175 (kawasaki)....http://partsfinder.onlinemicrofiche...sakipwc&a=155&b=5&c=0&d=1992 750 SX CRANKCASE

Just checked a kawi stud and it's 1.5 on case side, 1.25 cylinder side. Weirdo engineers.

 

[yamanube]

Just checked a kawi stud and it's 1.5 on case side, 1.25 cylinder side. Weirdo engineers.

Not a deal breaker, I could just flip them over and buy a common 1.5 pitch nut.

 

[hornedogg79]

Not a deal breaker, I could just flip them over and buy a common 1.5 pitch nut.

I had way too many $5 beers last night. I can do up to 8 studs at $5 each shipped.