SXR Where to put bilge pumpin SXR!!!!!!

[650sx707]

Just got an sxr would like some picture under the hood where the best place for the bilge to go,thanks

 

[Cannibal]

If you put it under the hood, it won't do you any good. :biggrin:

You can 5200 the base right in front of the stock syphon bilge, or Blowsion makes a bracket to install one.

 

[rollin5150]

Put it right next to the drive shaft. Most people use the blowsion bracket to mount the bildge. It attaches to the factory siphon bildge box and located the bildge properly. Other guys use the 750GPH bildge and strap it down where your tool kit goes. I run the blowsion dual bildge bracket. I will see if I can get a pic for ya

 

[Texan33]

You have two same threads?


Even though I put my 1100gph automatic pump on the left side of the driveshaft.

 

[icecoled007]

Above is the best option for the SXR, or just where the tool kit is provides enough.

Unless your doing heavy sub/ocean riding I would just put a versa-plug on the back and be done with it. Works really well

 

[Texan33]

Versa-plug is not recommended if you are going to leave your jet ski "floating" in the water for a while, it will leak.

 

[edmoto]

All the brackets for sale mount at the same spot: at the stock bilge. Just decide if you want one or two a/m bilges there. Mock up your bilge before riveting/gluing/securing the bilge to the bracket so the bilge tube is aimed the toward your hull and not toward the firewall or your motor.

 

[john zigler]

i have SXR bilge brackets in stock here. 26.00 + s&h

http://watcon.com/Catalog_Pages/Bilge_Parts.htm