Freestyle who does good cylinder porting for decent prices?

[js/sj]

Like the title says. I don't have alot of money but want to get my cylinders ported. I heard Xmetal is good. I want a big increase in power for freeride and freestyle.

 

[DirtyJ]

Jetworks Jetworks Jetworks

 

[Matt_E]

Jetworks/BlackJack Performance. Art Gomez basically.

 

[LeftysRule22]

I don't have alot of money but I want a big increase in power for freestyle.

Keep polishing that unicorn horn. :biggthumpup:

 

[sefi81]

Jetmaniac !!!!!!

 

[sicksxr07]

Jetworks performance . Art gomez

 

[raytherace]

Jetmaniac !!!!!!

its not Blue who made the porting for him ???

 

[jetpilot36]

bang for the buck= jetworks deep pockets=dan lamey

 

[Pablo]

For best bargain with performance gains I'd hit up Jetmaniac/blue in a heartbeat. If you want a bigger name then hit up art Gomez. U won't be wrong with either. LPW is around too (Paul Lehr), always a good guy with great knowledge to share.

 

[Bigfish]

Jetworks/BlackJack Performance. Art Gomez

 

[BruceSki]

I was very happy with my xscream porting on my 701 before my small end crank bearing let go this summer. The price was reasonable too.

 

[Marcgraham27]

http://www.racelogic.com/shop/index.html

order the sport port template, take your time and do it your self

 

[js/sj]

http://www.racelogic.com/shop/index.html

order the sport port template, take your time and do it your self

I have a template but im affraid to do it. Is it that hard? If i were to do it and one port was a little different than the other will it things up?

 

[Matt_E]

Depends on your budget. In the long run, you will be much happier with a pro-ported motor.

 

[XJCrawler]

Jetworks!!!

 

[Jr Freestyle]

I have a template but im affraid to do it. Is it that hard? If i were to do it and one port was a little different than the other will it things up?

go to work make the bucks and pay a pro for the quality..IMO

 

[waxhead]

poor people pay twice.
Spend the money and get it done right

 

[Marcgraham27]

If your port work is different yes it will affect compression in the cyls, the key is to take your time and do it right the first time. it's a good winter project seeing on how it would take about 8 or 10 hrs total the first time you do it... I had a sportported top end that i loved. after the port work was done there was about a 5psi difference in the jugs but it never caused a problem... but if you can afford it then the pro's will obviously do a better job.

 

[badvinny]

All these guys are good just pick one, Dasa did mine for $275 2 years ago, how can a good job get any cheaper than that!