Who does stator re wiring????

oxnard111

oxnard111

Creative RE Purchasing
Location
so Cali, Ventura/Oxnard area
#.0 said:
Are you trying to have the actual coils rewired or the whole stator assembly?
Click to expand...

well the stator in question had the wires cut on the outside of the box (even though I told the guy to pull the ebox apart and disconnect from the inside... idiot!).

so the stator coils are probably aright, but it needs a new length of wire. and the stator is pretty gunky... the flywheel cover was almost completely filled with water except for the very top 1" of the front area. So it is not too rusty, but just nasty. Water probably sat there for 6+ years.
 
#ZERO

#ZERO

Beach Bum
Location
Florida - U.S.A.
Do it yourself and save some money.

Here are some pictures of the 62T stator I wired up using tinned marine wire with silicone coated fiberglass jackets and black 5200.

If you need some tinned wire or silicone fiberglass jackets let me know.
 

Attachments

  • DSC01313.jpg
    DSC01313.jpg
    28.8 KB · Views: 55
  • DSC01314.jpg
    DSC01314.jpg
    78.9 KB · Views: 84
oxnard111

oxnard111

Creative RE Purchasing
Location
so Cali, Ventura/Oxnard area
#.0 said:
Do it yourself and save some money.

Here are some pictures of the 62T stator I wired up using tinned marine wire with silicone coated fiberglass jackets and black 5200.

If you need some tinned wire or silicone fiberglass jackets let me know.
Click to expand...

would you consider doing it for me? you already have the product (and I assume the wire). send me quote if you would consider it.
 
SXIPro

SXIPro

JM781 Big Bore
Location
Here on the 'X' mostly
#.0 said:
Do it yourself and save some money.

Here are some pictures of the 62T stator I wired up using tinned marine wire with silicone coated fiberglass jackets and black 5200.

If you need some tinned wire or silicone fiberglass jackets let me know.
Click to expand...

Dude, you do the cleanest work I have ever seen, on everything you post pictures of. Mind if I ask what you do for a living?
 
Algonquin

Algonquin

Location
Southern CT
#.0 said:
Do it yourself and save some money.

Here are some pictures of the 62T stator I wired up using tinned marine wire with silicone coated fiberglass jackets and black 5200.

If you need some tinned wire or silicone fiberglass jackets let me know.
Click to expand...


Do you know of some good directions on how to do this?, or if you posted a "how to" it would be very appreciated.
 
#ZERO

#ZERO

Beach Bum
Location
Florida - U.S.A.
Algonquin said:
Do you know of some good directions on how to do this?, or if you posted a "how to" it would be very appreciated.
Click to expand...
I'm rewiring a 62T stator right now and I'll post some instructions with pictures later.

Anyone with a solder iron, heat gun, small file, phillips screw driver, and electrical crimping tool can do the job.
 
oxnard111

oxnard111

Creative RE Purchasing
Location
so Cali, Ventura/Oxnard area
#.0 said:
I'm rewiring a 62T stator right now and I'll post some instructions with pictures later.

Anyone with a solder iron, heat gun, small file, phillips screw driver, and electrical crimping tool can do the job.
Click to expand...

hmmm maybe i'll wait to see your write up and see how much i can obtain the materials for before i send it out to you.
 
joesuperjet

joesuperjet

X
John at Jetski solutions is a top notch guy. He does great work and has a fast turn around. Everything I have ever sent him, looked better than new when it returned.


JAM
 
tbaer

tbaer

USMC
Location
BEAUFORT SC
joesuperjet said:
John at Jetski solutions is a top notch guy. He does great work and has a fast turn around. Everything I have ever sent him, looked better than new when it returned.


JAM
Click to expand...


accept he misquoted me and charged my card 100 more $$$ and won't fix it! he told me 198 and charged me 298 p!ssed me off. then i got the carbs back and he "forgot" to put needle and seat in them. I he did a good job on my stator.

JSS does good work just make sure he quotes you the right price and double check his work. when you get your stuff back.
 
Big Kahuna

Big Kahuna

Administrator
Location
Tuscaloosa, AL
tbaer said:
accept he misquoted me and charged my card 100 more $$$ and won't fix it! he told me 198 and charged me 298 p!ssed me off. then i got the carbs back and he "forgot" to put needle and seat in them. I he did a good job on my stator.

JSS does good work just make sure he quotes you the right price and double check his work. when you get your stuff back.
Click to expand...

hmmmmmmmmmm. I know somebody else that has had that happen to them.

John is hit or miss. His ADD level is off the charts. Makes Caker look like an angel.


2003 I picked up a few small odds and ends from him at a ride at Lanier. Few months later we are up there riding, he is there. "John, what do I owe you for the parts?" , Response: "dont worry about it". Cool. 6 months goes by and I get a not really nice PM "When are you going to send me $25.00 (somewhere around that number) for those parts?". From that point on, get a quote by email or PM and save it.
 
dbrutherford

dbrutherford

Parts Whore
Location
Fairmont, WV
I believe there is a place called RM Stator. Go browse the really small print ads in a Dirt Bike or 4-Wheeler magazine. Those really small ads in the back that are all print, no graphics. There are usually places there that do stator work listed in those ads. Also try Ricky Stator, they rewound a 4-wheeler lighting stator for me once. Work looked good but i never used it and sold the quad...
 
You must log in or register to reply here.
Top Bottom