Freestyle Who makes a good rolling work cart?
- Thread starter Rodneysj
- Start date
FlightPlanDan
Don'tTrustAfartAfter50
- Location
- Crescent Beach, FL
Jetmaniac.
- Location
- Largo, Fl
x2 ... really nice, recently lowered the price too.
- Location
- Round Rock, TX
Did Jetmaniac start shipping them? last I checked it was pick up only
feartheride
feartheride
- Location
- St.Catharines,On.Canada
You !!
Noy hard to make if you can weld or know someone..I made mine out of 2x2 steel and some 1 3/4 to slide inside of the upper tubes , so it has adjustable hieght, 4 wheels and a rattle can...
Noy hard to make if you can weld or know someone..I made mine out of 2x2 steel and some 1 3/4 to slide inside of the upper tubes , so it has adjustable hieght, 4 wheels and a rattle can...
- Location
- Stillwater, Oklahoma
Agreed, or you can make it out of wood. Here is a pic of mine. The carpeted part the ski is sitting on goes in the back of the truck.
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
maniac
- Location
- United States
I cant believe people buy work carts. If you make them from aluminium or steel they are so much cheaper than buying them.
If you got the extra cash why not :woot:
- Location
- Largo, Fl
My soldering iron doesn't get quit hot enough to weld aluminum or steel.
sjetrider
615 Freeriders are addicted to T1 madness.
- Location
- in the 615 (Nashville)
Where you located, that would help.
- Location
- CT
2x4s at home depot
These hold everything from a big 3 seater to a superjet.
If you add a 2nd runner on top (the green) on the inside of it and carpet the whole thing it works better for the standups. We have like 5 around the shop it makes it so easy transfering to and from the trailers and hitch haulers
These hold everything from a big 3 seater to a superjet.
If you add a 2nd runner on top (the green) on the inside of it and carpet the whole thing it works better for the standups. We have like 5 around the shop it makes it so easy transfering to and from the trailers and hitch haulers
Attachments
Last edited:
sjetrider
615 Freeriders are addicted to T1 madness.
- Location
- in the 615 (Nashville)
I have an adjustable that works with a scisor jack , goes high enough to load in my 4x4 full size dodge with a lift and low enough to load on my trlr, we made 4 all from galvanized tubing. I got the tubing free and its still alot of time and money due to welding and casters and runners and the jack. If your close to me I would sell ya one.
Im in L.A. California
These are my favorite. You just remove the handle for use with jetski. I’m hooked on the ability to adjust the working height of my ski for various tasks. Saves the back. They are not for everybody. Some folks prefer having swivel casters on all 4 because of tight working spaces. I like the duals as you can lock the front two and the cart stays pretty still when you need to wrench.
http://www.northerntool.com/shop/tools/product_200365546_200365546
http://www.northerntool.com/shop/tools/product_200365546_200365546
Last edited:
steve-uk
Manners cost nothing
- Location
- Barrie - ontario
i started making these
http://www.x-h2o.com/threads/85181-New-Design-Stand-up-Shop-Cart-Customizable&highlight=
but pretty much as every one says its cheaper to make your own...
http://www.x-h2o.com/threads/85181-New-Design-Stand-up-Shop-Cart-Customizable&highlight=
but pretty much as every one says its cheaper to make your own...
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
I made these with y'alls tax dollars. I had to buy the PVC but the steel was all scrap from the Corps. :usa:
SXIPro
JM781 Big Bore
- Location
- Here on the 'X' mostly
Finally my tax dollars went to a worthy cause.
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
lol no problem, Glad I could help!