winch stands

[BossBailey]

Anyone know of a good place to get a straight winch stand? Like the ones shown in the pics.

 

[Mouthfulloflake]

local scrap yard or metal supply fab shop.

its just steel tube with a plate welded on the bottom, OR connected with U bolts.

 

[EvanB85]

http://www.trailerpartsdepot.com/

These guys would have anything you might need

 

[oxnard111]

Harbor Frieght

 

[YAMA CAT]

http://www.trailerpartsdepot.com/

These guys would have anything you might need

I purchasd my stuff from them when I did my trailer conversion.urr: urr:

 

[BossBailey]

http://www.trailerpartsdepot.com/

These guys would have anything you might need

I have looked on there website and found only 1 straight stand, but it is too short. I need one that is at least 24 inches tall.They sell a lot of angled ones.

Harbor Frieght

I did not see any on their website.

 

[SXIPro]

This one is plenty tall enough and is straight, not angled. It's made for a pontoon boat but may work in your application:

http://shop.easternmarine.com/index.cfm?fuseaction=catalog.prodInfo&productID=5082&categoryID=224

 

[Mouthfulloflake]

you can get hot rolled A36 steel square for around $8 a foot...

2" square with a 0.1875 wall thickness.

OR 2" square with a 1/8 wall thickness for less than $6 a foot.

 

[YAMA CAT]

Boss, I looked too. I only found the 17" uprights. When I purchased there was a bigger selection.

 

[BossBailey]

This one is plenty tall enough and is straight, not angled. It's made for a pontoon boat but may work in your application:

http://shop.easternmarine.com/index.cfm?fuseaction=catalog.prodInfo&productID=5082&categoryID=224

The pontoon stands would work but just too expensive. Looks like I will have to fab something up.