wrapping or paint rrppole tubes

[brylon644]

Has anyone ever wrapped or painted rrp pole tubes? Just wondering if they will still fit in the upper and lower pole brackets.

 

[Wetbuffalo]

Pretty sure you could have them re-anodized. It will consume a little bit of the outer skin of aluminum. I wonder if this would affect the fittment.

 

[Roseand]

Mine were painted. Took a wood block hammering against the base to get one side off, but it was doable. Install was about the same. Hitting them down on a wood block to put them back in worked for me. Was tight but not that hard to do.

Sent from my SM-G920V using Tapatalk

 

[SELF27]

I know hurricane sells wrap/sticker kits for tubes. Would be cheap to just by wrap from ebay though. I've seen them powdercoated too, but makes adjusting them harder.

 

[N3vrSat1sfied]

Wraps will not fit in the tubes.

 

[Rowley286]

I bought a big carbon decal sheet off eBay and wrapped my old pole. I just jammed the tubes in and then cut of all the excess at the brackets with a razor blade. They turned out great.

 

[Big Kahuna]

Think Tom from Hot Products was telling me at WF that some racers were just painting the tubes and running them like that. Looked good.