WTB: Mikuni Dual 40 carbs

[Jomps]

Need stock dual mikuni carbs for 99 sxi pro.

 

[sturat]

Better off building a set of dual Sbn38s or 44s. The 40s are incredibly hard to find with people very unwilling to sell them and some parts are NLA for rebuilds, such as throttle shafts. Most people want $300 for a set of just carbs versus being able to purchase a full 44 setup for about 4-450.

 

[Jomps]

So the throttle and choke shafts are no longer available? I have a pair but they are rough and I Bent the shafts Taking them apart

 

[sturat]

So the throttle and choke shafts are no longer available? I have a pair but they are rough and I Bent the shafts Taking them apart

correct


edit: my advice is sell the carbs and intake manifold you have and shop for a set of 44s.

 

[Baja 252]

I have a set of Yamaha 44 carbs (no manifold) from a 760 Venture if your interested. Been sitting for a couple years but it ran fine when ski parted out (hole in hull).

 

[Jomps]

I have a set of Yamaha 44 carbs (no manifold) from a 760 Venture if your interested. Been sitting for a couple years but it ran fine when ski parted out (hole in hull).

I found a pair of Keihin and manifold off a 96 zxi that I think I’m gonna grab but I appreciate it bud

 

[Jomps]

correct


edit: my advice is sell the carbs and intake manifold you have and shop for a set of 44s.

everything on the ski is stock and will be for a bit. Will dual 44s be too big? How much could I sell my carbs for? Basically parts carb as there is some corrosion and pitting around the throttle bore

 

[sturat]

everything on the ski is stock and will be for a bit. Will dual 44s be too big? How much could I sell my carbs for? Basically parts carb as there is some corrosion and pitting around the throttle bore

250 with the manifold. Give or take a few bucks. No they wont be too big.