- Location
- Midwest
Has anyone ran a ATP pole bracket with a x metal pole? Thinking about doing this on my brawler since the hull is already drilled for the ATP pole.
Freestyle X metal pole with ATP pole bracket?
- Thread starter vshockey10
- Start date
- Location
- Ogden, Utah
I just installed my X-Metal Pole on a WDK bracket and it fit fine. I did have to run a full length RRP pivot bolt because the X-Metal pivot bolts were to short. I don't see any reason the ATP bracket would be any different. Should be the standard 6 3/4 inch width.
The drill pattern for most, if not all, RN compatible a/m pole brackets is the same. So don't let that hold you back.
- Location
- Midwest
I posted this really quickly and forgot to meantioned that I measured the pole this morning along with the stock rn to see the spacing. What I was wondering about more or less is the air tubes since the ATP ones are much larger. 4seasonspower did you have any trouble jamming the tubes into the pole? Did You throw a pole spring in there?
- Location
- Ogden, Utah
I'm not running pole breathers or a pole spring so unfortunately I can't say. From what I have seen I think the ATP breathers are the same size or marginally larger than the XMetal. I think you'll be just fine.