XFT delta shredder build

superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
At East Park reservoir for Memorial Day weekend! Of course I forgot my life jacket.. Off to the store
07216570cd65911f9c2f16e4ca6f11f6.jpg
18eafb5705bfd8fe7e4fc2dbbcf75226.jpg



Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
I got a life vest I put about 14 gallons through her. Rides awesome! I still have to remember I have a trim. I was getting close to nosing in on flips off my own wake, there were no boats to try off of... I ended up loosing my intake grate but I couldn't be more happy with this hull.
f7dcde5eadd2d1b16c6534912c376e57.jpg



Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
I ended up taking out those rear foothold bumps, they never really locked in my foot and just got in the way of my ankle when I used the front ones... This hull rides nose high already in the front holds, using the rear holds just made it to hard to ride.


Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
Like to do a little bumpy. I have to take out the motor and take her all apart again. 2 pump inserts ripped out of the hull and my midshaft sounds like a blender. I'll post pics and procedure of my insert install.


Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
Works with bmx style levers. I make mine, get the bulk cable sheathing and then a long brake line it runs through a bolt with a knarp on it. It's crazy how smooth it pulls.


Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
It's been a while since I have posted. I got my pump fixed, and thought I'd throw on a thrust trim too.
This is the empty spot where the insert goes.
743289428568c057ca2f4d37311ebd81.jpg

Here is the insert in the hole it came from
264302acd5bf81e202addfbe89e8dc08.jpg

Sanded the hole and mixed up some tap plastics super hard 4-1 resin with cabosil and poured it in.
4f7903023afe394bcfa96964b703dd28.jpg

Sanded flush and ready to rock! To lazy to paint :) you don't see it when you're riding
e4d924f10a1e2136116e484e11592b2d.jpg



Sent from my iPhone using Tapatalk
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
With the trust trim.
a173eb4f2e94c939f262a887931efcf3.jpg

I'm also thinking about selling the engine and getting some big power, maybe a bore over the winter, it's a stock bore 61x/61x with stock electronics with my porting.. I haven't been on the water in over a month. Maybe instead of a bore I need bigger balls?


Sent from my iPhone using Tapatalk
 
mike b

mike b

Michael "Mayhem" Bevacqua aka MikeyChan
Location
California
I found your balls grow when you have more power than you can handle. I progressed so much on my TPE coming from a big bored 780. Got over my fears and look back to my first week and laugh. I'm on week 7 right now. If only I started in the first of May rather than July. Sweet build tho and you got to learn a lot I'm sure. Learning over a period of time is much better than stumbling over something
 
superjetguy

superjetguy

It's hard to speak without a tongue.
Location
lake hogan
Took her to the surf over the weekend. I loved it but it killed my back, I went out without a helmet also, second wave I hit my chin on the Chinpad and got a mild concussion. But aside from that I loved the way it handles out there! Unfortunately I only have one picture


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top Bottom