- Location
- Fort Worth
I Just finished this build and it turned out super clean. Hull and handle pole for sale as well. Everything was bought here from either Jetmaniac or other members. I am 2nd owner of the hull. This is a perfect freestyle ski. the hull came in at 108 lbs with handle pole, bracket, plate , grate, inserts and all related hardware. Everything is full carbon. I will not take less than $6500. buyer pays for shipping. I have pallet and can box it up.
Hull with hood handle pole ,nose piece, bracket with all hardware, grate, plate, chinpad, aluminum pump shoe
$3000.
HULL
Full carbon hull
carbon hood with hand holds
carbon nose piece and handle pole
carbon chin pad,
aluminum bracket
XFT carbon foot holds (nice holds)
r&d intake grate
custom glass plate
SN steering cable
Motor (2 hours on bran new motor. barely broken in. ran 32:1 full synthetic)
735 fully ported cylinder and cases all new gaskets and o rings
cases were ported and epoxied.( no ramps)
PRO X 83mm pistons
R&D Pro series billet head with full girdle
30cc dome @ 220psi AV gas 100 octane LL
Cart tank with dual pickups, return, and vent
carbon fiber reeds on stock cages
Riva reed spacer
BCW racing manifold
44 black jacks with tauceti tornados and prefilters
MSD Total Loss Analog system 4270 Pro digital 2
B pipe with ported manifold and head pipe
Pump
Solas Mag with 9/15 hooker
ATP freestyle cone
62 reduction nozzle
Protec steering nozzle +50mm
Bran new Thrust original EZ pull system with billet lever
Blowsion quick steer plate with UMI bearing kit on straight bars with ODI lockers
500GPH bilge with built in XFT scupper
Backflips aren't my thing. So im willing to trade for a freeride lightweight SJ (must not have soaked foam) with comparable mods. But of course cash is always king.
this build cost me north of 9k
Hull with hood handle pole ,nose piece, bracket with all hardware, grate, plate, chinpad, aluminum pump shoe
$3000.
HULL
Full carbon hull
carbon hood with hand holds
carbon nose piece and handle pole
carbon chin pad,
aluminum bracket
XFT carbon foot holds (nice holds)
r&d intake grate
custom glass plate
SN steering cable
Motor (2 hours on bran new motor. barely broken in. ran 32:1 full synthetic)
735 fully ported cylinder and cases all new gaskets and o rings
cases were ported and epoxied.( no ramps)
PRO X 83mm pistons
R&D Pro series billet head with full girdle
30cc dome @ 220psi AV gas 100 octane LL
Cart tank with dual pickups, return, and vent
carbon fiber reeds on stock cages
Riva reed spacer
BCW racing manifold
44 black jacks with tauceti tornados and prefilters
MSD Total Loss Analog system 4270 Pro digital 2
B pipe with ported manifold and head pipe
Pump
Solas Mag with 9/15 hooker
ATP freestyle cone
62 reduction nozzle
Protec steering nozzle +50mm
Bran new Thrust original EZ pull system with billet lever
Blowsion quick steer plate with UMI bearing kit on straight bars with ODI lockers
500GPH bilge with built in XFT scupper
Backflips aren't my thing. So im willing to trade for a freeride lightweight SJ (must not have soaked foam) with comparable mods. But of course cash is always king.
this build cost me north of 9k
