Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Why would IJSBA care if they cracked?
(Yamaha 650 cases with different intake ports welded on)
- Thread starter ryno_281
- Start date
- Location
- Lake Havasu City, AZ USA
Ya, i have every intake gasket from every year Polaris and none have the single bottom hole, with the lowered side holes. They are all double holed and centered like on Kaw/Yam, also not Tigershark lol. Definitely MX parts..
Last edited:
If I remember the ski went out of control from crack / carbs going WOT and it went on the beach and someone got hit. That’s the story I heard. Person didn’t make it
I’m sure someone else will chime in and provide more clarity. It was NOT good
- Location
- the jetski grave yard
after a second look, that separate plate with the reed stuffer on it aint no watercraft stuff.
I've got some crazy frakenstien 8mm all welded up 61x with the kawi 750 track welded on the cylinder with the case blocked off. it uses 040 yam 360 RT, DT pistons, so old dirt bike stuff don't surprise me a bit.
I've got some crazy frakenstien 8mm all welded up 61x with the kawi 750 track welded on the cylinder with the case blocked off. it uses 040 yam 360 RT, DT pistons, so old dirt bike stuff don't surprise me a bit.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
92-94'ish
Yup, PSI Genesis Power! PSI was into watercraft back in the early 90’s those reeds are early 90’s Polaris Snowmobile. Fairly rare! Most all of us were running the Kawi 750 welded on intakes, or the westcoast version of the same. These guys were the only ones I knew of running sled parts?
- Location
- the jetski grave yard
look what I just tripped over and found laying on the floor in a pile of parts. brand new with part #. it Suzuki LOL I got 2 brand new ones i'll sell you. 916 334 3786 if you want to call
Quinc
Buy a Superjet
- Location
- California
@TheBuzzard while in quarantine its time to write the History of jetskis book. 
Interesting? I stand corrected! Pretty sure this was a PSI mod, didn't know Suzuki was in the mix??
Just fun to find out how other manufacturers mingle in the mix !!
waxhead
wannabe backflipper
- Location
- gold coast
Thats kinda wild, Flawed by today's logic but awesome in its ingenuity
- Location
- Ontario, Canada
- Location
- the jetski grave yard
I just sell parts and ride skis. I'm no writer.
I just want to sell junk that I keep tripping over. I can barely read much less write.@TheBuzzard while in quarantine its time to write the History of jetskis book.
Quinc
Buy a Superjet
- Location
- California
We will have to find you a ghost writer. And you give them pictures and the history behind all of your 1 of a kind and unicorn parts. With prices and contact info at the end of the book of course.
- Location
- the jetski grave yard
Just bumped into these looking for other junk
- Location
- California
Old post but my friend owns a shop here in cen cal and told me he took a Yamaha 650 and welded on rm500 quad reed cages on and it was a mosster back in the mid 90s.. possibly his old motor? Darren Pritchett is his name if it rings a bell to you.. super cool regardless
- Location
- Redding, California
Very well could be, looks like It was painted yellow at one time. Thing rips.
BruceSki
Formerly Motoman25
- Location
- Long Island
I have a motor with a set of cases like this. Been itching to try it but it’s sitting on a bench like it belongs at the buzzards house. 
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
- Location
- the jetski grave yard
Dont even think about sending that junk my way. I'm liquidatingI have a motor with a set of cases like this. Been itching to try it but it’s sitting on a bench like it belongs at the buzzards house.
Sent from my iPhone using Tapatalk Pro
