Yamaha case hardware

[be_lain]

Looking for a set or two of hardware for yamaha cases. Need all 8 bolts that mate the case halves, as well as the 7 bolts for the bed plates. Or if someone has a tip on anywhere else to get aftermarket hardware that would be great too

 

[te4250]

I would imagine you could get whatever you need off McMaster but can take a look when I get to the shop

 

[Moto360]

The 8 case bolt are available from Yamaha and super reasonable. Not sure about bed plate bolts.

 

[te4250]

8 case bolts are M8 X 1.25 85mm
hex head: https://www.mcmaster.com/91287a715
or shcs: https://www.mcmaster.com/91292a281
M8 washers: https://www.mcmaster.com/98689a116

Bed Plate bolts are M10 X 1.25
1 is 80mm long: not available on mcmaster, https://www.probolt-usa.com/mlsshx1...ed-hex-m10-x-1-25mm-black-x-80mm-black-1.html
5 are 70mm long: not available on mcmaster, https://www.probolt-usa.com/mlsshx1...ed-hex-m10-x-1-25mm-black-x-70mm-black-1.html
1 is 35mm long: https://www.mcmaster.com/92800a197 or if you want it to match the others from probolt https://www.probolt-usa.com/mlsshx1...ed-hex-m10-x-1-25mm-black-x-35mm-black-1.html

M10 washers: https://www.mcmaster.com/98689a117

 

[yurkanip]

Looking for a set or two of hardware for yamaha cases. Need all 8 bolts that mate the case halves, as well as the 7 bolts for the bed plates. Or if someone has a tip on anywhere else to get aftermarket hardware that would be great too

Blaine whats up man!!. Search Cory Fautsch, on facebook and is hands down one of the best places to find any used jetski part, particularly Yamaha. His business is PWC salvage.

 

[be_lain]

Right on thanks dawgs