Zach and Libby memorial ski build for Mason

[Crab]

Need two 1.5 needle and seat for this build asap!!!!!

 

[Crab]

drive installed one handed

 

[Crab]

still need

need pole bolt
steering stop
ebox brackets
pipe to waterbox hose
bilge pump and hose
bilge hull fitting
bow and stern eyelets

 

[Crab]

need asap!!!

2-135 main jets

midshaft rebuild kit

umi steering rebuild kit

help

 

[Crab]

need pole bolt
steering stop
ebox brackets
pipe to waterbox hose
bilge pump and hose
bilge hull fitting
bow and stern eyelets

Parts coming from slyan23, thx.

 

[Crab]

Got some nice stuff from Watcon, thx Randy. Do need a throttle cable adapter if anyone has a spare....

 

[Crab]

need throttle adapter and rubber for stock flame arrestor screens (2), and one long 4mm bolt.

 

[Matt_E]

I got the rubber.

 

[Crab]

I got the rubber.

bring saturday, need one long f/a bolt as well.

 

[Polish jet pilot]

Man, I wish I was closer ... I have a few parts laying that could have helped... this is so nice of you guys to build a ski for Mason. What has happened is a tragedy and the person who did this should rot in hell. Really.

 

[crashski]

I have a long bolt for the stock F/A if you still need it. I Also have a freestyle cone if you want to use it.

 

[Crab]

I have a long bolt for the stock F/A if you still need it. I Also have a freestyle cone if you want to use it.

bring saturday

 

[crashski]

Crab, Ill be driving my car so ill need someone to meet me at the ramp to help carry stuff.

 

[Crab]

Crab, Ill be driving my car so ill need someone to meet me at the ramp to help carry stuff.

beach access is 2 miles south of the pirate ship, sand is hardpack.

 

[superramjet]

any parts still needed? i've been off the boards for a while. I still have a large selection of yamaha nuts and bolts, including hpole bolt if still needed. Thanks, Tom

 

[SXIPro]

need asap!!!

2-135 main jets

midshaft rebuild kit

umi steering rebuild kit

help

I have midshaft bearings, but that's it, not the whole kit. PM me if you want 'em. Thanks

 

[Crab]

I have midshaft bearings, but that's it, not the whole kit. PM me if you want 'em. Thanks

got everything, thx. Do still need throttle adapter!

 

[Crab]

still need rubber gaskets for oem flame arrestor screens!!!

 

[Crab]

still need rubber gaskets for oem flame arrestor screens!!!

 

[Crab]

Also could use a primer kit for duals with the tee's needed to install