zeeltronic

K

kafrovic

Location
Athens
Quinc said:
Might something here:

DIY Total loss or MSD TL upgrade box 270USD?

So, after reading a bit on: http://www.x-h2o.com/index.php?threads/diy-total-loss-on-a-budget.166929/ and http://www.x-h2o.com/index.php?threads/msd-enhancer-vs-protec-modded-cdi.183691/ I discovered that @waxhead had found a very nice fully programable Ignition box, that could do everything...
www.x-h2o.com
Click to expand...
Thank you a lot
I already have one zeeltronic but i am looking fro a curve use it on my dasa 1100
 
Jcary85

Jcary85

Site Supporter
Vendor Account
Location
Glenmoore pa
32 from 1500-5500, drop to around 18 by 7000 and just taper from there. That’s pretty much the standard curve most people run from what I’ve seen
 
S

Storbeck

Location
Minnesota
Jcary85 said:
32 from 1500-5500, drop to around 18 by 7000 and just taper from there. That’s pretty much the standard curve most people run from what I’ve seen
Click to expand...

Do you mean "straight from there"...Like taper from 32 at 5500 to 18 at 7000, then a straight line at 18?

Or are you tapering down from 18 as you go up in rpm past 7000?
 
Jcary85

Jcary85

Site Supporter
Vendor Account
Location
Glenmoore pa
Storbeck said:
Do you mean "straight from there"...Like taper from 32 at 5500 to 18 at 7000, then a straight line at 18?

Or are you tapering down from 18 as you go up in rpm past 7000?
Click to expand...
I continue to taper down. Doesn’t really matter. Most motors are only hitting 7k rpm anyway
 
You must log in or register to reply here.
Top Bottom