Search results

I got a solution..........run a Lamey motor!!!!!!!! lol Anyways, what's up Dale and Brian? Later. Jeff

A ton of them!!!!! The 140mm anything from 14/19 to 17/25. The 144mm 13/19 to 16/23. And the 148mm 13/19 to 17/25. I have also used the 155mm and tried from 7/12 to 14/19. I have some good setups for each one depending on motor set up. But remember, like Chucky said, it also depends on...

FX-6.9 BOY, It was great talking to you today, and I look forward to helping you get that "BAD MUTHA" going. You better be ready to get tore up!!!!!! I will talk to you soon. Later. Jeff

I have tried a 140mm mag, on a 927cc motor, based on the 66e, and it cannot handle the power. It does OK on the mid and top end, but the bottom end cavitates really bad. The 144mm mag works good for that application, so does the 148mm. But, on the REV12, you have to start with a 148mm mag. A...

It sounds like you might have a water leak in your head. After running it in the water, you can carefully pull the spark plugs and check for water. Look at the outside ring of the plug, around the electrode, and you may see tiny little droplets of water. Gasoline will not leave this, only...

It could be John or Derrick. Either way, it was cool meeting you guys. Late

The box is grounded by the black wire from the stator. If this wire gets a small break or some corrosion, you will lose everything. Try grounding the box by running a wire from the motor to the mounting post off the box. Make sure the contact areas are clean (no paint or corrosion). If this...