Search results

Does look lean.

Yes, it will be noticable. Enhancers alone suck off idle untill midrange. http://www.msdpowersports.com/pwc_enhancers.html

I cut some $20 ZXI sponsons in half and bolted them to the front of my ski. Alot more linear in the corners now. Probaly not even close to Tubbies, but I'm cheap.

Kinda a goofy system , but it works. The Enhancer bumps up the timing in the midrange but it's actually retarded on the low end So, you need the timing advance plate to put it back up there for a snappy lowend But, if you have too much compression you'll detonate. The timing retard is a...

I would'nt run it without it. You might have low enough compression to get away with it. I'd spend the $30. I have one, my buddy didn't. We were racing back to the harbor on a flat day. His ski didn't sieze but it started to not run right. We popped the head, and his pistons looked like a scoop...

yes, with a u bend.

If you spend $40 for a Flowcontrol valve and put it to the line with the waterbox or stinger it will make it pretty snappy. You could even do two if you wanted. That's alot of water dumping in there. I wouldn't spend the money for another pipe until your buddy can beat you. I've rode a couple...

I'd say the bigger pump is the fix. I had a similar problem with mine. I got a hold of an old 19-21 mod impeller with a 4mm bigger hub. It helped a bit.

If you get one be sure to run it with an advance plate and retard module. I know that sounds like it makes no sense but the retard module is only for higher rpm.

Happened to my 96. It was the stator.

Seems like 650's always do that. Not sure why.

You can use ecwi on wet pipes, including stock pipes. I've used it on 5 different boats and it's always been money well spent. I've fought the bottom end battle on Kaws before. Heres what improves the bottom end in order of results. 1. ecwi with or without aftermarket pipe 2. 81mm nozzle &...

Claimed to give (and I beleive them) 20% more toruqe at low rpm. It really works wonders on 750's, really about the biggest bang per buck there is. http://www.factorypipe.com/a_ecwi.php

ecwi works better than anything on these boats.

A protracter will even be fairly accurate.

Menards,Hoime depot, $5 pitch guage.

My 96. Jensen ported Super Cylinder,MRD, 12 vane mag pump, Stevensens 19-21 prop. I'm going to flat deck it and put fixed steering on it, I'm getting old.

That is a nicw Pro!

It will fit, as long as it is for a 95,96 SXI and not a SXIPro, 97 up.

http://www.pwctoday.com/search.php?searchid=3867107