Has anyone ever seen this type of damage? Is this a critical area? It is in the front of the case/stator housing area. It is on a set of used/remanufactured cases.
That was it! You were exactly right... I took the top 90 fitting and the small hole was completely clogged. Cleaned it out and it now hits hard all day! The pipe was heating up way to much and it was choking out my bottom end power. I can hold my hand on the pipe for almost 5 seconds now...
Changing the pilot jet didn't help and I pulled it out of the water and dried the pipe out. That didn't help either.
THEN I pulled the hood off and rode it around. NO BOGGING! I looked for an exhaust leak again but found nothing... The pipe gets very hot to the point that a drop of water...
Usually the ski sits anchored in the water during the day and then I pull it from the water overnight. I will try drying it out.
Also going to remove the temp sensor from the head to see if that does anything.
It happens in the water.
Stock 61x
Riva Redpipe and intake
135 main
115 pilot
1.5 n&s
Silver spring... looks shiny (65grams)
I think I may be onto something though. This weekend I discovered that the idle adjustment was almost completely seated on the spring. I have messed with the low...
I have a 94 SJ I bought in pieces and put back together 2 weeks ago.
It rips (no bogging whatsoever) for about 2 minutes from a cold startup or until the motor heats up. I adjusted the lowspeed setting and it cleaned up slightly but still bogs pretty bad no matter what the setting(runs best at...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.