Search results

I don't. I have had a few requests for one but don't own the steering setup to take dimensions from. If I had the steering system in my hands I could figure it out in a day or two.

I have 4 sets of these available no defects sorry guys I have gotten better at making them!

I just shipped my last set. It'll be a few weeks before I can get to making more. I just bought a new house and am in the middle of moving my shop. Do you want me to let you know when I have some available?

One set left!

I have freshly machined parts in stock! 2 sets left! Pm me if you are interested in getting some.

Parts are all sold! Pm me if you want to get on my waiting list for the next batch. It helps me out tremendously. I'm not a manufacturer, just a guy making parts in his garage. Thanks guys!

B1 bar risers mount in stock location and have 1 1/8" clamps for mounting Fat Bars of your choice. I have 3 sets available. $110/shipped

These are a huge improvement! My kiddo and girlfriend really like them. I've gotten a lot of positive feedback so far from the sets I have sold also. I'm doing limited runs on these parts and currently on back order. I'm running some parts tonight and tomorrow, and should have an excess of 5...

I only bought my Blaster in June to even know this problem needed to be solved! My kid and GF ride it and both complained about the stock bars/bar height. Did you purchase an aftermarket steering system?

Hey guys I have been manufacturing small batches of riser mounts for fat bars on a B1 Waveblaster. They bolt up to the stock location and give you about 2 inches of rise. I have these on my kid's/GF's B1 and they absolutely love them. Just a cheap, easy way to get some 1 1/8" bars and a little...

I'm totally going to print up a couple sets of these! Thanks guys!

Cylinders still available?

I can recut the domes if necessary I have a CNC mill. I hadn't thought about it really. Thanks this is there sort of input I'm looking for. Like why shouldn't I spend ten minutes taking the head off to machine it again?

i just picked up a WB1 with a fresh 61X and a protec pipe. I want to bump the compression by shaving the head on my mill. Anybody out there know how much I should or can take off?

Yeah i paid $24 for a 2 inch piece, but out was slightly damaged. They at usually 30.

Naw, you just gotta digg for it here!

I sat and thought about what I would do if I were you and didn't have easy access to foam. I think I would carve one out of clay. Clay is easy to mold, when it is wet you can carve it, when it is dry you can sand it. The big three use it for concept cars, life sized cars made of clay. I do not...

I got the resin from ebay, since I am not working on the actual thing I will ride yet I figured it would be the perfect time to try this stuff out.

I took the mold from my super jet, then widened it to my liking. Now i am going to cast a mold of that mold, and glue it into my foam model. That will be what i pull the final mold from. So this piece that I have invested several days into, is simply a stepping stone. "Lookin good! Hope to see...

Woo Hoo! A whole weekend with no work and fresh ski building supplies!! I can't wait to get to it tomorrow. Thanks for all the support guys! It really drives me forward!