Search results

I'm just going to find an oem used one. I don't like not knowing for sure about the timing. I do want to run a slight advance on the timing to help the bottom end. Thank you guys anyone want a crappy 62t stator lol. Sent from my iPhone using Tapatalk

I'm thinking I got shafted. Was trying to go a less expensive route. Sent from my iPhone using Tapatalk

My motor is a built 61x. I recently bought an tbm AM flywheel. So I purchased a 62t stator off eBay that was rebuilt. The stator has no timing mark as it had been sand blasted off. I've study pictures and tried my best to align the timing from the pictures. It runs, starts easily. Just it seems...

Well it took my buddy almost 2 months to paint it at his shop. I finally got it back and installed everything before 4th July (2 days). It ran amazing even kept up with a sxr 800 modded. Sorry for no pics during assembly. Here's some pics during 4th July. I didn't have all the turf done...

Completed the hood liner today Now to complete sanding and deliver to my buddies shop to be painted. I will get more pictures soon just busy with my vehicle starting to run hot. Sent from my iPhone using Tapatalk

Lol you catch on good. Yes it is but I wanted to bring this ski back to life to last another 25 years. Just layed the mold/fiberglass for a new hood liner today tomorrow cut holes for breather tubes and maybe glass it in. Can't wait for it to be painted though highs have been in the mid 80s...

I know it looks better from the side I'll try and get another picture today Sent from my iPhone using Tapatalk

The tray is finally done wuh I also cut some on the front splash guard Before After I also got all the green crap out of the hood and mocked up some cardboard for a mold. Will lay that this afternoon Sent from my iPhone using Tapatalk

Laid one finally layer of 12oz on the tray yesterday so now the tray is done. I started work on the hood, what a pain. I finally got the liner out and most of the green glue. My plans are pretty much do a yamaslut mod. Originally I was going to reshape the nose but I am tired of fiberglass and...

It's been while since I've updated progress. I cut the foam for the sides. Installed Toby footholds and glassing it back together. Sent from my iPhone using Tapatalk

Not much for taking a lot of pictures. I got the tray foamed in. What a pain in the rear. I took my time to get it tightly fitted. I wanted it to be snug around my lines so a lot of fine cutting was done. Sorry I don't have a pic of it finished. I did poor expandable foam over the top and used...

I was able to get all my lines and exhaust in and sealed with 3m 5200. I went a little crazy with the 5200 but I wanted it sealed. Still glad I got the drain plugs put in. Should start foaming today. I had to order more fiberglass, used more than originally expected. I plan on cutting up the...

10-4. Thanks Sent from my iPhone using Tapatalk

Alright will do. You think sand around it and 5200 will do. Sent from my iPhone using Tapatalk

So I started repairs on the side of the ski where it was bondoed. I ended up just cutting the piece out. Glad I did it, had probably 1" thick of bondo. So I used plexiglass and baking sheets to make a form. I layed to layers of 17oz to feel the gap. Yesterday I glassed over it all on the...

I'm going to try to find something at Home Depot that way I can seal it tomorrow and start to process of cutting foam. I've been researching like a fool couldn't not find much info on it. If all else fells I'll get one from you DAG. Just wanting to knock her out so I can get back on the water...

I'm building my SN the tray is completely gutted. What kind of tubing do I use and what about the ends. I'm wanting to cap it off for future use. Sent from my iPhone using Tapatalk

Okay military training had me gone for a little bit. But got the ski cleaned up and now ready to do some real work. I'm going to replace one of the cooling lines then add another so I'll have three. That way I can run the stock syphon bilge. I went to my local NAPA and ask to look at the...

I made sure I didn't cut the cooling line. But you can see it's been there by the rust around it. The last picture is the screws sticking through. Sent from my iPhone using Tapatalk

Not having much time to work on her but did get more foam out. I also found one of my cooking lines was cut and dumping water into the tray. Also the previous owner had the right side bondoed and screws through it. After a closer look the panel is warped in and that is the reason for the bondo...