Search results

Looking for a jet dynamics ride plate, extended. Thanks!

I'm interested in a set, are these still available?

Looks just like mine, sounds like a cool project.

Get it going! I just got my SN running again with the RN pole, makes a huge difference. A shortened RN pole, quick-steer mod (at the turnplate and nozzle), really make the ski handle a lot better. Intake grate should be #1 on your mod list as well, will make it handle chop a lot better and...

Check your start/stop switch, bypass it to see if that is your problem (disconnect black/white wire connector near e-box I think). I had all kinds of starting/spark issues and it turned out to be the most simple fix, the start/stop switch on these things are :-):-):-):-) for some reason.

Bring a battery and see if it works, probably has more problems than that

I also just picked up a SJ about 3 weeks ago. At first it was really tough, the first couple times I went out I had no problem getting up but porpoising and cavitation were a real issue. After a couple more days of riding and learning better throttle control and riding position I noticed a...

That'd be really cool, think "Dirt 2" with stand ups! Wave Race will have to do for now :P

Seems that cleaning the switch and greasing the hell out of the internals fixed the problem. Now to start tuning...

Popped open the lanyard switch and the contacts were all grimy and oxidized, cleaning those and the other contacts. Will see what condition the new switch I got is in, may swap that in or just swap the lanyard switch rubber cover. Also taking out the plug I put in for the drain hole, water...

Anyone have a pic of what these look like on a ski? Does it go below the railing? I'd be interested if you can make a color to match the stock '94 graphic "pink".

I'll check next time I can, didn't know there were 2 styles. If it's the "better" style, is it still worth upgrading to a SS impeller? I'll hold out until I can get a good deal on a swirl/concord style impeller.

Yeah I made a pattern after pulling the stocker and had some help getting it sewed, then stapled it back on just like stock. I still have the pattern if anyone wants it. I find that the brake lever has a little longer distance, but it's throw is perfect, needed no adjustment. It gives a...

Picked up this superjet from a neighbor who's had it for years, hardly ever used it but didn't want to sell until it started running bad. A $25 carb rebuild kit later and it's running great! Has a little issue that I just figured out is the start/stop switch but can't complain for $350...

Might just buy a working used one, at the very least I would have to replace the gasket cover for the lanyard switch that was ripped.

Haha yeah that helps a lot. I fixed that rubber seal with super glue, seems to hold up OK but probably needs to be replaced. I didn't take any of the switches apart, as I didn't have time or a clean area to do so yet. Also, there was a small hole on the bottom of the start/stop switch, looked...

Are there any connections in the e-box for those wires that corrode as well? The e-box looked sparkly clean when I opened it up: Getting a sealed AGM battery, will try cleaning the switch some more and see what happens. The metal contacts in the b/w wire engine bay switch looked fine.

Can you go into detail how you cleaned it? I just opened it up and used contact cleaner on everything and then put dieelectric grease on all the electrical fittings. Did you remove the switches and sand/file the connections?

Made some progress today, tested all the e-box stuff; stator checked fine except for lighting coil which checked to 4.2V, supposed to be 6-10V AC. All other resistances and voltages checked OK for the stator. Coil checked out OK, though I couldn't test the primary coil with my multimeter...

The extra water coming in is from a warp and crack in the front of the hood, along with a really old hood seal I'm sure. That actually works out kind of nice, I just put a bilge pump in and routed the hose right under that crack. It's just large enough to accommodate the hose until I get a...