2016 Phantom Island Tribal Build

[tnt01]

Now I know how u guys feel drilling holes on your brand new hull...It's hard for me to put hole on the hull

I should had josh drill them hole...haha...

Not mounted yet

 

[GabeH]

Before you put drill bit to pristine lay up, whisper "remember: this hurts me a lot me than it hurts you".

 

[tnt01]

Before you put drill bit to pristine lay up, whisper "remember: this hurts me a lot me than it hurts you".

Haha....so funny...

 

[SkiPro]

I thought i was going to be sad too. Turning of a new leaf...

 

[sinisterjosh209]

Now I know how u guys feel drilling holes on your brand new hull...It's hard for me to put hole on the hull

I should had josh drill them hole...haha...

Not mounted yet
View attachment 302194

Is that a lowered pole bracket?

 

[tnt01]

Is that a lowered pole bracket?

Yes it a blowsion lower bracket

 

[sinisterjosh209]

Is that a lowered pole bracket?

Never mind just looked close, saw the bracket is still up on the studs! Lol

 

[tnt01]

Never mind just looked close, saw the bracket is still up on the studs! Lol

Dude can u drive over and drill it for me...haha...come on it only a 14hrs drive 28 round trip..piece of cake...

 

[tnt01]

All strip down...what do guys thing it worth...I know the money and time I put into to building the hull.


What left
Intake grade
Pump shoe
Ride plate
Blowsion lower hood and nose piece
Bob holds
front foot holds
One way versiplug
Drain plugs for the tray
Tubbies
Fuel selector
blowsion hood hooks
A/m handlepole

 

[tnt01]

I was very nervous and very pain full to put hole in my hull but it done,took half the day.I think I measure 20times before I finally drill the holes...haha..


Had cut the backing plate

Here my rrp pole all mounted

 

[tnt01]

Install the pump and midshaft and everything went perfect had to install one shim on each side of the pump.silicone the pump shoe



Install the intake grade,trim & steering cables

 

[tnt01]

If anybody knows will the cold fusion e-box mount work on my phantom hull?

 

[sinisterjosh209]

Install the pump and midshaft and everything went perfect had to install one shim on each side of the pump.silicone the pump shoe
View attachment 302256

View attachment 302259
Install the intake grade,trim & steering cables

View attachment 302260

Dude u made it look too easy, at this rate it will be running tomorrow

 

[tnt01]

Just got a little setback,got to find a e-box mount,will the cold fusion work on the hull?

 

[jonolove]

Yes it will or just epoxy the stock e box mount in the location you choose or drill some more holes and through bolt it if running a ratchet strap make sure you are below it's mounting location

 

[tnt01]

No go on the oem ebox mount my front foot hold on my sj are covering the bolts,so I need to find a different option

 

[Pablo]

Behind carbs. It should fit. Measure thickness of ebox plus bracket and some nylon washers to space it off side of hull a couple mm. Measure and test fit distance from hood lip too for batt cable clearance and distance to run to starter/battery.

 

[Twake]

The cold fusion mount should fit.. Do you already have one to try?

That or you can just bolt the ebox straight to the front of the tray using the 3 taped mounts on the back of the ebox. Like how they are mounted in raiders.

 

[SkiPro]

http://www.x-h2o.com/index.php?thre...ring-nozzles-ebox-mounts.171892/#post-1834473

Set of stock ebox mounts $18 if you don't have a cold fusion yet

 

[tnt01]

just got a pm from jm,i'll be installing cf mount for my ebox moving on with the build