diamondaudio10
Wave Junkies
jay
u get the parts yet?
u get the parts yet?
750 X2 build. allot of pics.
- Thread starter Jayski
- Start date
- Location
- Australia Melbourne
jae
Nope hopfully tomorrow... I comp tested my motor today.. Shizen, had way to much comp with the 25cc domes allmost 230PSI, so i replaced it with the 30cc so now i have 190PSI which is just what the doctor ordered, ill presure test the engine tomorrow and will be riding it on the weekend.
Nope hopfully tomorrow... I comp tested my motor today.. Shizen, had way to much comp with the 25cc domes allmost 230PSI, so i replaced it with the 30cc so now i have 190PSI which is just what the doctor ordered, ill presure test the engine tomorrow and will be riding it on the weekend.
Last edited:
- Location
- Australia Melbourne
Last edited:
Polish jet pilot
4aces4aces4aces4aces4aces
- Location
- Warsaw, Poland
That is one nice X2!
- Location
- Australia Melbourne
cheers mate, i still need to get myself a factory pipe once thats done it will be complete and all the power it should have will be delivered.. Here are some pics from the weekend, hitting the waves again tomorrow.
diamondaudio10
Wave Junkies
i see u got the parts, looks good
extreemthrottle
freeride junkie
- Location
- north palm beach
night and day difference imo.
had the westcoast on a modded 650 motor, installed the f.p. with a mod chamber, totally different animal..
dbrutherford
Parts Whore
- Location
- Fairmont, WV
Where did you get those cable ends at? They look like the TBM ones. But I can't being myself to pay 25 a piece for them when you need 4 for an X2 
- Location
- Australia Melbourne
j
Yep cheers mate, Just need to get myself a hoodchop kit now....
I got them private sale from the US, i paid $10us for all of them. waste of money really, but they look flash..
Yep cheers mate, Just need to get myself a hoodchop kit now....
Where did you get those cable ends at? They look like the TBM ones. But I can't being myself to pay 25 a piece for them when you need 4 for an X2
I got them private sale from the US, i paid $10us for all of them. waste of money really, but they look flash..
- Location
- Australia Melbourne
j
Not quite finished but not far off..
ill get some time of the lathe tonight to get the prop done
Not quite finished but not far off..
ill get some time of the lathe tonight to get the prop done
- Location
- Australia Melbourne
Not to much, have to get a pump shoe from a doner 750sx or sxi (maybe you can get them new) then you have to muck around to get that to fit then glass or glue it in..
You have to modify your x-2 ride plate and shorten you 750sx or sxi scoop grate (or you can mod a standard 650 one i guess) but its easer to shorten a 750 one.. then you can either silicolon the whole pump in or you can build up the serounding part of the pump with glass filler and use the rubber pump seal, if you dont think you will remove it again id go with silicon.
The hood locks on x2 are shiza or on any ski really (clips have come undone yes).. If your jumping waves you would be silly not to have additional hood straps. Not to mention if you are doing stabs or subs or rolls there is allot of presure on tha hood.
- Location
- Australia Melbourne
Thats what i origionaly was going to do (even bought more hood locks) but i thought into it further, The hood has allot of flex and can often jump off the locks (when landing on it side) even with the latch locked... I figued if it can jump off with 2 then it could jump off with 4, so i thought a strap that adds support to the front as well as the back would be best....
Philipcyde works ok it seems? trick looking ski.
Thanks. It does shift a little side to side. But I'm not worried at all about it coming off. I located the front hooks down low so they pull real tight. I think your straps are pretty much the safest thing I've seen though.
The only thing that would keep my hood on was some major reinforcement on the back side to strengthen the hood, and two heavy duty straps crossing from corer to corner with stainless hardware. I eventually quite using the hood latches all together and only used the straps. Only way to go IMO.
- Location
- Australia Melbourne
j
x-2guy Hood kit and new trim cable on its way... also bought a thrust innovation SJ adaptor so i can run a standard SJ airbox..... NO MORE WATER BOGGING DOWN MY SKI!!!!
Pre filters are a complete waste of money BTW, i hightly recomend never trying them..
OH and the new pump what can i say!!!
x-2guy Hood kit and new trim cable on its way... also bought a thrust innovation SJ adaptor so i can run a standard SJ airbox..... NO MORE WATER BOGGING DOWN MY SKI!!!!
Pre filters are a complete waste of money BTW, i hightly recomend never trying them..
OH and the new pump
what can i say!!!
Last edited:
- Location
- Australia Melbourne
jae
Do your selves a favour and get a Hood kit and a stock filter!! prob a scupper 2... Cause my ski just cost me another 1k.
Do your selves a favour and get a Hood kit and a stock filter!! prob a scupper 2... Cause my ski just cost me another 1k.
- Location
- Miami Beach, Fl.
!
ski looks siiik! i love how u used those high pressure water fittings! i have them on my rx7!
ski looks siiik! i love how u used those high pressure water fittings! i have them on my rx7!