750sx Freestyle Build 1100cc

[kevbo]

There not much pipe tuning on these three cylinders. Just getting the exhaust out of the hull with little back pressure will work.

 

[Reckless83]

I used 2 Stroke Wizard to design it so should be pretty good.

 

[Reckless83]

Got the flange pipe tacked in place today. So far everything clears the hood by over a 1/2". Also thinking about relocating my engine water inlet to top/center of manifold to allow better flow. Black marker is where im thinking, may have to weld on a bung.

 

[Reckless83]

Trimmed of the excess fat on the manifold today and drilled and tapped the relocated water inlet.

 

[Reckless83]

Slowly getting closer.

 

[Quinc]

Looks great!

 

[ryno219]

Interested to know if youd be willing to sell me one of those flanges you made. I am working on a 750sx 1100 swap and I want to build my own exhaust system.

 

[Reckless83]

Interested to know if youd be willing to sell me one of those flanges you made. I am working on a 750sx 1100 swap and I want to build my own exhaust system.

I will sell you one but the cost is $250 for me to get another one made from Protolabs.com.

 

[Reckless83]

I will sell you one but the cost is $250 for me to get another one made from Protolabs.com.