SASQUATCH113
Gimme Time....
- Location
- 941
Hey all,
My friend moved to upper NY and decided he couldn't let himself sell his X2, so he gave it to me to 'keep in the family.' It never ran like a champ while he had it, but I am determined to get it back on water by time he comes back to visit.
Right now my only problem I am having is the wiring has been butchered to hell.
I have only worked on Yamaha's so this is a somewhat new world to me.
Here is a picture of the wires coming from the flywheel. 2 Yellow,1 Black, 1 Black/Red, and 1 Black/Yellow.
Here is the WSM CDI. The wires coming from the unit are 2 spark plug wires, 2 Black, 1 Blue, and 1 Black/Red.
The wires were then spliced and led to the following color wires
Black>Black (ground)
Black>Black
Blue>White
Black/Red>Purple
Then this magical box of hot mess.
The regulator has
Yellow>
Yellow>
Black>ground
Red> currently hooked to 'Red' Relay wire
Red/Blue(purple?)> currently hooked to 'orange' start switch
Relay has
Red> currently hooked to red regulator
Black>ground
Yellow/Red> currently hooked to 'white' start switch
I have a print out of the wiring diagram from the service manual but it seems most of my wires don't match up to it.
I also have a spare wire that was cut. It looks like the cluster of wires that would come from the flywheel. The wire colors are 1 Purple, 1 Black/Yellow, and 2 Orange(maybe Brown?) This has me at a complete loss.
If someone with could help guide me to solving this rubix wire mess I would greatly appreciate it.
My friend moved to upper NY and decided he couldn't let himself sell his X2, so he gave it to me to 'keep in the family.' It never ran like a champ while he had it, but I am determined to get it back on water by time he comes back to visit.
Right now my only problem I am having is the wiring has been butchered to hell.
I have only worked on Yamaha's so this is a somewhat new world to me.
Here is a picture of the wires coming from the flywheel. 2 Yellow,1 Black, 1 Black/Red, and 1 Black/Yellow.
Here is the WSM CDI. The wires coming from the unit are 2 spark plug wires, 2 Black, 1 Blue, and 1 Black/Red.
The wires were then spliced and led to the following color wires
Black>Black (ground)
Black>Black
Blue>White
Black/Red>Purple
Then this magical box of hot mess.
The regulator has
Yellow>
Yellow>
Black>ground
Red> currently hooked to 'Red' Relay wire
Red/Blue(purple?)> currently hooked to 'orange' start switch
Relay has
Red> currently hooked to red regulator
Black>ground
Yellow/Red> currently hooked to 'white' start switch
I have a print out of the wiring diagram from the service manual but it seems most of my wires don't match up to it.
I also have a spare wire that was cut. It looks like the cluster of wires that would come from the flywheel. The wire colors are 1 Purple, 1 Black/Yellow, and 2 Orange(maybe Brown?) This has me at a complete loss.
If someone with could help guide me to solving this rubix wire mess I would greatly appreciate it.