Custom/Hybrid Backie Chan build

[CWAmeden]

Sent from my SCH-I535 using Tapatalk 2

 

[CWAmeden]

I picked up my backie chan hull a couple weeks ago.
When I got it home I sanded the bilge and clear coated it with some airplane clear to help protect it
I did the same thing to the bottom of the hull, try to get some extra life outa that paint job lol

Sent from my SCH-I535 using Tapatalk 2

 

[Crab]

Where's the beef?

 

[CWAmeden]

This weekend I've got the pump in, the stator section had to be flipped 180 degrees to clear the steering cable
I painted the chamber to match tbe ski
The pump went in pretty easy, needed some shims the back. The motor lined up nice also. Im going to run the xmetal water box, it fits with a good inch or more around the whole box. It sits kinda crooked but should be just fine

Sent from my SCH-I535 using Tapatalk 2

 

[CWAmeden]

Did a quick mock up with eveeything, waiting on a pole bracket and Steve is painting my pole. Hoping to get that stuff soon ro finish her off. I don't want to mount the waterbox in yet since I need to install the pole and bracket. Going to need all the room I can get!
Quick run down of what's going in
781 jetmaniac bb
38 blackjack carbs
Msd enhancer
Xscream modded b pipe
144 skat mag pump
Worx 201 extended an inch to fit the hull.
Xmetal adjustable pole
Pretty basic for now, should be decent power in this short light hull

Sent from my SCH-I535 using Tapatalk 2

 

[ProSouth]

What motor? Fine lookin paint get up!!

 

[CWAmeden]

Beef is my gullet. Edited added specs above

Sent from my SCH-I535 using Tapatalk 2

 

[Crab]

Yummy

 

[ProSouth]

I'm not sure what hull you had before. Assuming an SJ. But my 718 single carb and stock electronics made a huge diff in my bob. I think you'll enjoy.

 

[deftons56]

Intake grate is +2 inches.

Better get a sharp hole saw for your pole breathers, the kevlar is a bitch to get through!

Looking good dude, I'd be over there helping if I wasn't broken, not that you need it.

Actually since you're waiting on your pole and bracket you can come work on mine! LOL!

 

[CWAmeden]

Yeah I just was grinding the welds on the intake and realized it wasn't one inch lol oops. Ill buy a new hole saw for the pole breathers. Yours just needs to be ridden haha

Sent from my SCH-I535 using Tapatalk 2

 

[Crab]

Intake grate is +2 inches.

Better get a sharp hole saw for your pole breathers, the kevlar is a bitch to get through!

Looking good dude, I'd be over there helping if I wasn't broken, not that you need it.

Actually since you're waiting on your pole and bracket you can come work on mine! LOL!

If I wasn't broken I would come tune it...

 

[CWAmeden]

Buncha broke bitches

Sent from my SCH-I535 using Tapatalk 2

 

[deftons56]

Yours just needs to be ridden haha

Sent from my SCH-I535 using Tapatalk 2

I need to open up the pump shoe to 148mm and put a smaller prop spacer in. Pretty much done but can't even work on the thing for a few weeks!

 

[CWAmeden]

Ill help ya out, gotta let me ride it tho

Sent from my SCH-I535 using Tapatalk 2

 

[deftons56]

Ill help ya out, gotta let me ride it tho

Sent from my SCH-I535 using Tapatalk 2

Bring your wrist guards. :silly:

 

[swapmeet]

Did a quick mock up with eveeything, waiting on a pole bracket and Steve is painting my pole. Hoping to get that stuff soon ro finish her off. I don't want to mount the waterbox in yet since I need to install the pole and bracket. Going to need all the room I can get!
Quick run down of what's going in
781 jetmaniac bb
38 blackjack carbs
Msd enhancer
Xscream modded b pipe
144 skat mag pump
Worx 201 extended an inch to fit the hull.
Xmetal adjustable pole
Pretty basic for now, should be decent power in this short light hull

LOL we're running almost the exact same drive train. What prop?
I still need to get a intake grate.

Good idea about having Steve paint your pole.... Hmmmm :thinking:

 

[canadiancartel]

LOL we're running almost the exact same drive train. What prop?
I still need to get a intake grate.

Good idea about having Steve paint your pole.... Hmmmm :thinking:

id recommend the ATP torrent forsure. i was going to go with a worx 228 for my gen 3, but then went with the ATP torrent because i was hearing great things about its performance. i picked one up from canadian-freestyle.com it came in 3 days, and man that thing is absolutely beautiful. for being about the same price as the 228, its ADJUSTABLE (pretty sweet) and it adds some nice billet bling to your boat! i havent tested it in the water yet, but i have a pic of it on my build thread and am going to write a review on its preformance as soon as i get the BOB floatin!

 

[Stblaz08]

It needs a custom grate

Sent from my SCH-I605 using Tapatalk 2

 

[canadiancartel]

It needs a custom grate

Sent from my SCH-I605 using Tapatalk 2

didnt know the backie chan used a custom grate! haha nevermind then!