DIY/printable impeller pitch gauge

[yamanube]

I remember seeing one on here previously but cannot find it now. I just want to print one off on paper to get an idea of where my impellers are at. Anyone have a link or a file?

 

[yamanube]

Derp, found it in the tech FAQ.

 

[Blue]

Amazon has clear cylinders which work great for making a gauge.

Sent from my SM-N950U using Tapatalk

 

[yamanube]

This seams simple enough.

 

[WB800BLASTER]

post up a link to down load that file. Nice and simple and would save me making one. Thanks Pat

 

[yamanube]

post up a link to down load that file. Nice and simple and would save me making one. Thanks Pat

http://www.mediafire.com/?ejmymdnzzzn

 

[WB800BLASTER]

thank you sir!

 

[davidescu_radu]

http://www.mediafire.com/?ejmymdnzzzn

on what format of paper should i print it?

 

[yamanube]

on what format of paper should i print it?

I just used standard 8.5x11 printer paper.

 

[cpolaris502]

Is it pretty straight forward on how to read it? Just match up the angle that fits the line best?

 

[Big Kahuna]

Yup

 

[beerdart]

I made that .dwg back in 2007 it got around. Here is the printable .pdf No need for it to be round angle is angle.

 

[davidescu_radu]

thks

 

[johnshortmeyer2900@gmail.]

I made that .dwg back in 2007 it got around. Here is the printable .pdf No need for it to be round angle is angle.

i just printed this thank you

 

[fastgtfairlane]

I just bit the bullet and bought a torrent pitch gauge cause it will do any impeller up to 160mm and goes down to a 5 degree leading edge. Lowest I've seen on any other pitch gauge was 8 degree leading edge

 

[beerdart]

I just bit the bullet and bought a torrent pitch gauge cause it will do any impeller up to 160mm and goes down to a 5 degree leading edge. Lowest I've seen on any other pitch gauge was 8 degree leading edge

Diameter does not matter angle is angle.