Custom/Hybrid Front foot hold in an XFS

Proformance1

Proformance1

Liquid Insanity
Location
New York Crew
Weight doesnt bother me in the surf, matter of fact i like it, more stable. In flatwater back to back tests with multiple riders the XFS made further rotation than any other ski in the group, the lighter shorter hulls had more amplitude, but they also had larger motors. I think skills have a lot to do with BF etc. Alot of the rest is hype. Now back on topic please :) Front foothold in the XFS, Jordan just cut it or sell it to me and ill cut it.
 
JETSKIHORDER18

JETSKIHORDER18

Location
Sacramento, CA
junebug do you mind if I post up some photos that scott sent over? And back to the XFS, there is not reinforcement needed to ride in surf. I have ridden my ski in some serious surf and did some huge flops and was terrified I broke something and everything was perfectly fine.
 
RickyB

RickyB

Location
Saratoga Springs, NY
JETSKIHORDER18 said:
junebug do you mind if I post up some photos that scott sent over? And back to the XFS, there is not reinforcement needed to ride in surf. I have ridden my ski in some serious surf and did some huge flops and was terrified I broke something and everything was perfectly fine.
Click to expand...

Yeah go a head I tried to upload a picture but I can't do it from my ipad.

Im moving to Saratoga Springs next week, I have a surf xfs and a xfs ninja where do you guys ride at in New York.

Ricky
 
JETSKIHORDER18

JETSKIHORDER18

Location
Sacramento, CA
We have a riding group of about 15 riders with just about every ski on the market. I live on Lake Ontario so we ride there quite often. We also hit up Lake Erie once in a while.
 
Last edited:
dcptr

dcptr

Location
Australia
Nuklear6 said:
For everyone who doesnt feel like doing the conversion to LBS:

XFS glass: 110-112
XFR glass: 121-123
XFS carbon: 94-97

I did NOT know they were that heavy. I knew they were a bit heavier then other short aftermarket hulls but DAMN!!! Pretty much a deal breaker for me. My current surf fx with a ton of reinforcement and tubbies weighs 87lbs bare, 98 with a hood, underpad, and turf. I just cant see spending that much money to go up 25 lbs. I mean my former pink surf reinforced square only weighed 120.....
Click to expand...

Put it this way, I've had my XFS for a year and a half now- Its a hybrid surf/flatwater ski for me, up untill a couple months ago its been running a xscream 865 off its nut- crazy power for surf- could flip the thing off 1 foot breaks and also flatwater flip it- All I do is extend the RRP pole 60mm for surf (which takes 5 mins) and slap on the +80mm ride plate and she's an awesome surf rider. But I've gotten used to riding full flatwater setup in the surf now (short plate, short pole) so I just keep it that way. Learnt to only give half throttle braps for flips/rolls/re-entries that way and full noise for flatwater.

Just recently put in the xscream1000 in it.. Yes i ride it in the surf and yes it is rediculous. (I've made up an ignition switch for my TL: A-Curve 25deg peak @ 6000rpm limit and B-Curve for flat 29deg @ 9500rpm.

As for the weight- Its well worth it. A week before a made the 1000cc transplant, I was flipping it off 8-foot face bay (wind) waves and accidently rode too close to the pier near the reef- Nosed in from a good 15+ foot high flip into the meter deep swell right into a big ass rock. I was waiting for it to go straight under untill I spun it round, only to find the gel-coat/paint and maybe a 3-4mm deep chunk of epoxy missing out of the nose. No stress cracks present anywhere else.
This is by far the best ski I've owned and wouldnt change it for anything else.

I was thinking about putting in a front footwell box myself, it would be very easy to do. I didnt in the end because I put the PowerFactor waterbox in to replace the battery with a lithium mounted on the firewall in that position. I may think about doing it again one day.
 
Last edited:
JETSKIHORDER18

JETSKIHORDER18

Location
Sacramento, CA
I agree with you 100% these skis are much more built proof then most people think. My motor is coming out within the next week and getting a front foothold, along with some other goodies.
 
air blair

air blair

you are the reason
Location
thumb, mich again
im in the process of putting my front foothold in, cut out bulkhead and im looking at 5-1/2 inch wide 4" deep and 3" tall foothold i made. foot fits in all the way to the bend at ankle and my shin will rest perpect on the bulkhead. This will be a sweet feature for sure stance. any interest in me making a mold of the foothold before I install it. lmk asap
 
MCrider

MCrider

Location
Jackson MI
Here's another one.

http://www.x-h2o.com/threads/127567-rickter-xfs-front-foothold-pictures

attachment.php

attachment.php

attachment.php
 
You must log in or register to reply here.
Top Bottom